I have the following suspension pieces off my drag car for sale:

- (2) Lakewood 90/10 Front Struts (part #40510) - $75 shipped to lower 48 states
- SOLD (2) Moroso Trick Front Springs (part #47210 set-up for Small Block). I cut 1/2 a coil off for ride height. Car still sat a little high so if you have a steel hood, steel heads, and full accessories you will need to cut another 1/2 to full coil off. - $50 shipped to lower 48
- SOLD (2) Stock A-Arms, very clean, with TRW ball joints and Energy Suspension Poly bushings - $35 shipped to lower 48 states
- (2) U.S. Brake/AFCO metric brake rotors for use with stock calipers (part #9850-6501), wheel bearings included, I have some hawk pads with 80% of their life left on them too. - $45 shipped to lower 48 states

All suspension pieces are used but with no street miles and less than 200 1/8 mile passes. Went to tubular set-up with coil-overs and Strange Pro-Series brakes. I'll give it a week on here then they'll go on ebay.

Thanks.

 

prices?

 

PM me with offers. You'd be surprised what I'd let this stuff go for.

 

The AFCO (U.S. Brake) Rotors also come with their wheel bearing kit and dust caps. Stock 3rd gen wheel bearings won't work. Let me know if you have any questions.

 

can you give me a starting point,then we can haggle a lil lol i dont wanna insult you

 

Interested in prices also.Have any pic's of condition, etc..

Im not looking to get into a bidding war with PM me offers.
Tell me what you want and I'll decide from there if its worth it to me like any other F/S add.

 

No intention of stating a bidding war guys...

Updated with prices.

- (2) Lakewood 90/10 Front Struts (part #40510) - $75 shipped to lower 48 states
- (2) Moroso Trick Front Springs (part #47210 set-up for Small Block). I cut 1/2 a coil off for ride height. Car still sat a little high so if you have a steel hood, steel heads, and full accessories you will need to cut another 1/2 to full coil off. - $50 shipped to lower 48
- (2) Stock A-Arms, very clean, with TRW ball joints and Energy Suspension Poly bushings - $35 shipped to lower 48 states
- (2) U.S. Brake/AFCO metric brake rotors for use with stock calipers (part #9850-6501), wheel bearings included, I have some hawk pads with 80% of their life left on them too. - $45 shipped to lower 48 states

Let me know if you have any questions.

 

I can email pictures when I get home but all parts were new when I installed them in 2010 and as mentioned before no street miles and only ~200 1/8 mile passes.

 

pm sent....for a-arms

 

pm sent on springs

 

p[ictures of 90/10's and springs please

 

Sorry for the picture delays for those who have asked. I got held up at work last night. I'll get them posted tonight.

Springs are sold, lower a-arms are probably gone too.

 

A-Arms are now sold.

 

Tell me about those rotors. Are they lightweight drag-specific? not a good idea for street use (less heat sink effect)?

 

Here is a link to the rotors:
http://www.jegs.com/i/AFCO/921/9850-6501/10002/-1

They can be used on the street. Not too much lighter than stock but definately beefier.

Let me know what you think.

 

Also, struts are sold.

 

I've PM'd/emailed you .......no reply
Any other non-stock parts I'll need to use these rotors if I get them including the bearings and pads from you?