Car Will Not Go Into Diagnostic Mode
08-03-2015, 12:20 PM
#1
Senior Member
Thread Starter
Join Date: May 2011
Location: Houston,Texas
Posts: 549
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 Camaro (Z28 Clone)
Engine: LB9|TPI
Transmission: 700R4
Axle/Gears: 2.73
Car Will Not Go Into Diagnostic Mode
When I jumper the pins to put it into diagnostic mode nothing happens.
Anyone have an idea what this could be, is there a fuse that powers it.
BTW the car is a 1992 Camaro RS that I swapped an LB9 into, its speed density TPI
Any help would be appreciated.
Thanks!
__________
Anyone have an idea what this could be, is there a fuse that powers it.
BTW the car is a 1992 Camaro RS that I swapped an LB9 into, its speed density TPI
Any help would be appreciated.
Thanks!
__________
08-04-2015, 06:58 AM
#2
Junior Member
iTrader: (1)
Join Date: Mar 2007
Location: Mentor Ohio
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc Camaro
Engine: 350 Vortec TPI
Transmission: T56 Magnum
Axle/Gears: 10 Bolt 3:73
Re: Car Will Not Go Into Diagnostic Mode
When this happened to me, I changed out the computer and the car ran perfect. Hope this helps.
08-04-2015, 04:38 PM
#3
Senior Member
Thread Starter
Join Date: May 2011
Location: Houston,Texas
Posts: 549
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 Camaro (Z28 Clone)
Engine: LB9|TPI
Transmission: 700R4
Axle/Gears: 2.73
Re: Car Will Not Go Into Diagnostic Mode
I changed it out yesterday and had no success unfortunately, thanks for trying to help though. Next step is to drop it off at an electrician because I am defeated.
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
40
08-21-2015 02:12 PM
db057
TBI
10
08-11-2015 10:11 PM