Interior Discussion about interior restoration, repairs, and modifications.

Interior Lighting/Fuse Block

Thread Tools
 
Search this Thread
 
Old 11-25-2008, 05:12 PM
  #1  
Senior Member
Thread Starter
iTrader: (9)
 
Timinsk's Avatar
 
Join Date: Nov 2008
Location: CT
Posts: 898
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 3.23 LS
Interior Lighting/Fuse Block

Info: I have a 1989 camaro rs; my interior lights wont turn on and along with that my fuse box doesn't have a cover and the cover had the fuse box list of which fuse goes to what (i believe).

Need Help With:
Which fuses do what?
Anyone have a diagram of where all the fuses go?

I'm thinking of buying all new fuses; but i'd like to know what fuse goes to what and how many amps each one should be.

regards,
Timinsk
Old 11-25-2008, 05:30 PM
  #2  
Member

iTrader: (1)
 
FireChicken2.8's Avatar
 
Join Date: Jun 2004
Location: Eldridge, Iowa
Posts: 200
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Red T-Top Firebird, 1989 Iroc
Engine: 2.8L 173 C.I., 355
Transmission: Th700r4 Auto, Built TH700R4
Re: Interior Lighting/Fuse Block

If you have your owner's manual still there is a handy little picture and labels for all the fuses.
Old 11-25-2008, 09:23 PM
  #3  
Supreme Member

iTrader: (8)
 
Maverick H1L's Avatar
 
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes on 4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Re: Interior Lighting/Fuse Block

Do your radio and lighter socket work? If they do, your problem is in the wiring, not the fuse, because the fuse for the interior lights (I'm assuming courtesy lights, correct me if I'm wrong) is the CTSY fuse, which is a 15 amp (blue) fuse right in the middle of the fuse block, next to the circuit breakers for the power windows. Your fuse panel is also labeled as to what fuse is what. However for your convenience, if it will fit, I'll attach a diagram of the fuse panel. In the diagram, the fuse labeled (ACC) is the one for your interior lights.
Attached Thumbnails Interior Lighting/Fuse Block-fusedata.jpg  
Old 11-26-2008, 10:33 AM
  #4  
Supreme Member

iTrader: (167)
 
John in RI's Avatar
 
Join Date: Aug 1999
Location: RI
Posts: 5,021
Received 348 Likes on 263 Posts
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: Interior Lighting/Fuse Block

Check your door pins. they get corroded over time and many times can be removed, cleaned and re-installed to correct courtesy light problems.


Old 11-26-2008, 10:48 AM
  #5  
Senior Member
Thread Starter
iTrader: (9)
 
Timinsk's Avatar
 
Join Date: Nov 2008
Location: CT
Posts: 898
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 3.23 LS
Re: Interior Lighting/Fuse Block

thank you everyone for helping; this helps.
btw my radio is removed and my lighter ive never tried; but its really mangled.. so its hard to tell.
Old 11-26-2008, 11:18 AM
  #6  
Senior Member
Thread Starter
iTrader: (9)
 
Timinsk's Avatar
 
Join Date: Nov 2008
Location: CT
Posts: 898
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 3.23 LS
Re: Interior Lighting/Fuse Block

Originally Posted by Maverick H1L
Do your radio and lighter socket work? If they do, your problem is in the wiring, not the fuse, because the fuse for the interior lights (I'm assuming courtesy lights, correct me if I'm wrong) is the CTSY fuse, which is a 15 amp (blue) fuse right in the middle of the fuse block, next to the circuit breakers for the power windows. Your fuse panel is also labeled as to what fuse is what. However for your convenience, if it will fit, I'll attach a diagram of the fuse panel. In the diagram, the fuse labeled (ACC) is the one for your interior lights.
"PWR ACC"?
or
ACC 20-20 from what i see on the diagram
Old 11-27-2008, 11:55 AM
  #7  
Senior Member
Thread Starter
iTrader: (9)
 
Timinsk's Avatar
 
Join Date: Nov 2008
Location: CT
Posts: 898
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 3.23 LS
Re: Interior Lighting/Fuse Block

I replaced the fuses; and noticed the acc was shot and kid had a 10 amp in it when it was suppose to be 20 and i replaced it but now my interior lights stay on always; how do i turn them off?
Old 11-28-2008, 04:15 AM
  #8  
Member

 
alicat's Avatar
 
Join Date: Apr 2005
Location: tasmania australia
Posts: 328
Received 0 Likes on 0 Posts
Car: 1985 z28 camaro
Engine: 305 lg4,edelbrock,3"air cleaner.k&n
Transmission: turbo 700r4 w/b&m megashifter
Axle/Gears: Stock.
Re: Interior Lighting/Fuse Block

Originally Posted by Timinsk
I replaced the fuses; and noticed the acc was shot and kid had a 10 amp in it when it was suppose to be 20 and i replaced it but now my interior lights stay on always; how do i turn them off?
Check your headlight ****.If it's turned hard to the left,the interior light will stay on.Thats how it is in my 85 Z.
Old 11-28-2008, 08:40 AM
  #9  
Senior Member
Thread Starter
iTrader: (9)
 
Timinsk's Avatar
 
Join Date: Nov 2008
Location: CT
Posts: 898
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 3.23 LS
Re: Interior Lighting/Fuse Block

Ooh ok; I'll try that.
Old 11-28-2008, 05:33 PM
  #10  
Senior Member
Thread Starter
iTrader: (9)
 
Timinsk's Avatar
 
Join Date: Nov 2008
Location: CT
Posts: 898
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 3.23 LS
Re: Interior Lighting/Fuse Block

I turned my **** all the way to the right and the lights went off; that helped so much. I didn't expect that really. But I notice my dome light doesnt go on. So i'm going to recheck the fuse once I get out of work.
Old 11-28-2008, 10:55 PM
  #11  
Member

 
alicat's Avatar
 
Join Date: Apr 2005
Location: tasmania australia
Posts: 328
Received 0 Likes on 0 Posts
Car: 1985 z28 camaro
Engine: 305 lg4,edelbrock,3"air cleaner.k&n
Transmission: turbo 700r4 w/b&m megashifter
Axle/Gears: Stock.
Re: Interior Lighting/Fuse Block

Also the headlight **** is the dimmer for the instrument panel lights,so if you leave it fully to the right they wont be on.I just leave mine to the left,but not fully.Your dome light globe may be blown,or the door pins may be sticking.
Old 11-29-2008, 06:38 AM
  #12  
Senior Member
Thread Starter
iTrader: (9)
 
Timinsk's Avatar
 
Join Date: Nov 2008
Location: CT
Posts: 898
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: 3.23 LS
Re: Interior Lighting/Fuse Block

I'll recheck because I kind of freaked. I installed all new bulbs and then i looked and realized the person who owned teh car before me put a 10 amp into the acc so it was already shot and i replaced it with a 25 amp or it was 20... but anyways i replaced it and didn't realize it until i got home (10 hours later) that my lights were on (it was around 11pm) and i just got a new battery for it before that.. so i unplugged the battery and then replugged it while i had the **** turned all the way to the right and it turned them off but when i turned them on my dome light doesnt come on; the lights went off when door closed so i know that the pins work, ill recheck bulb when i get home.

thanks again everyone!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hawk312
Firebirds for Sale
36
08-22-2017 08:55 PM
Reddeath210
Firebirds for Sale
14
10-06-2015 08:20 AM
Ducati900ss
Camaros for Sale
1
09-02-2015 09:05 AM
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
09-01-2015 04:32 PM
theurge
TPI
7
08-21-2015 12:46 PM



Quick Reply: Interior Lighting/Fuse Block



All times are GMT -5. The time now is 07:55 PM.