1/8 mile guesses?
#1
Supreme Member
Thread Starter
1/8 mile guesses?
first time taking my camaro to the track tomorrow for test and tune. nothing real special. gen1 SBC, 350. th350, 10" stall, shift kit. 3.73 gear. 100 shot. 27x10x15 slicks. 750 holley vaccum secondary. hyd flat tappet, 268 duration, .488 lift with 1.6s. EPS intake. hooker shorties, 2 1/2 duals with h-pipe. flat tops with 305 heads. typical bucket of bolts. any guesses?
#3
Moderator
Join Date: Jul 1999
Location: 51°N 114°W, 3500'
Posts: 17,110
Likes: 0
Received 120 Likes
on
101 Posts
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: 1/8 mile guesses?
Don't get your hopes up. You should get a 9 second 1/8 mile ET if everything works properly. I think those restrictive heads will be holding you back. I highly doubt you'll get an 8 second 1/8 mile ET.
#5
Supreme Member
Thread Starter
#7
Supreme Member
Thread Starter
Re: 1/8 mile guesses?
first 3 passes were 8.7s.
last pass was 8.39, 82mph.
i was slowly starting to figure it out. interesting my buddy couldnt get under a 9.0 that claimed 8.3s.
it was a learning experience and we had a lot of fun.
last pass was 8.39, 82mph.
i was slowly starting to figure it out. interesting my buddy couldnt get under a 9.0 that claimed 8.3s.
it was a learning experience and we had a lot of fun.
Trending Topics
#10
Supreme Member
Thread Starter
Re: 1/8 mile guesses?
#14
Supreme Member
Thread Starter
Re: 1/8 mile guesses?
yes, with 100 shot, but not off the line. i only footbraked it to about 2,000rpm, then sprayed from 2nd gear on. i was fighting traction issues. still think i could let more air out. pretty sure i was running 14lbs?
Thread
Thread Starter
Forum
Replies
Last Post
[Sold] Hooker Exhaust System
dmorse1
Engine/Drivetrain/Suspension Parts for Sale
3
04-02-2016 02:45 PM
ray jr
Engine/Drivetrain/Suspension Parts for Sale
3
03-31-2016 09:26 PM