UMI Tubular k-member install -- Fully Detailed Video
#1
Member
Thread Starter
Join Date: Jun 2001
Location: new york , n.y. , USA
Posts: 397
Likes: 0
Received 10 Likes
on
10 Posts
Car: klowny1969 <-youtube 4 3rd gen vids
Engine: subscribe to klowny1969 on youtube!
Transmission: subscribe to my channel on youtube
UMI Tubular k-member install -- Fully Detailed Video
Hey guys..Here is a video of a tubular k-member install on a gta from start to finish..also subscribe to me (klowny1969) to be updated whenever I upload a new thirdgen video..thanks!
#3
Member
Thread Starter
Join Date: Jun 2001
Location: new york , n.y. , USA
Posts: 397
Likes: 0
Received 10 Likes
on
10 Posts
Car: klowny1969 <-youtube 4 3rd gen vids
Engine: subscribe to klowny1969 on youtube!
Transmission: subscribe to my channel on youtube
Re: UMI Tubular k-member install -- Fully Detailed Video
Lol thank u
#6
Supreme Member
iTrader: (5)
Re: UMI Tubular k-member install -- Fully Detailed Video
In other threads, I've seen people bash you for posting the videos. Whoring them out as is were.
However, I am not sure if people realise just how helpful the videos. You cover the salient points needed for the jobs and for those of us who know the procedures it helps remind us of the things we forget up until we are actually doing the job. Aka, nut and bolt sizes, minor snags.
12 years ago when I had just bought my basket case of a GTA it would have been very helpful to have these videos. So for the newbies these videos are a gold mine.
As compared to the regular shows like two guys garage that jump from putting the car on the lift, to suddenly pulling the camshaft out. Wait what? How did we go from putting it on a lift to INSTALLING the camshaft. What about the stuff in-between?!
However, I am not sure if people realise just how helpful the videos. You cover the salient points needed for the jobs and for those of us who know the procedures it helps remind us of the things we forget up until we are actually doing the job. Aka, nut and bolt sizes, minor snags.
12 years ago when I had just bought my basket case of a GTA it would have been very helpful to have these videos. So for the newbies these videos are a gold mine.
As compared to the regular shows like two guys garage that jump from putting the car on the lift, to suddenly pulling the camshaft out. Wait what? How did we go from putting it on a lift to INSTALLING the camshaft. What about the stuff in-between?!
Trending Topics
#8
Member
Thread Starter
Join Date: Jun 2001
Location: new york , n.y. , USA
Posts: 397
Likes: 0
Received 10 Likes
on
10 Posts
Car: klowny1969 <-youtube 4 3rd gen vids
Engine: subscribe to klowny1969 on youtube!
Transmission: subscribe to my channel on youtube
Re: UMI Tubular k-member install -- Fully Detailed Video
Thanks guys for the positive feedback.. the UMI K-member is a real nice piece. .I wouldnt recommend using stock springs with this setup..when u install the stock springs they sit bowed out to one side..not a big deal..can install lowering springs or coilovers to correct the issue..
I also hate the tv shows where they cut all the work they do and make it seem so easy..this is exactly why I like to show everything in my vids..
Thanks again guys for watching my thirdgen vids..dont forget to subscribe
I also hate the tv shows where they cut all the work they do and make it seem so easy..this is exactly why I like to show everything in my vids..
Thanks again guys for watching my thirdgen vids..dont forget to subscribe
#9
Senior Member
Re: UMI Tubular k-member install -- Fully Detailed Video
Subscribed!
I intended to do a good video during my LS swap... didn't happen, too much work to do both at the same time, so I can appreciate this!
I intended to do a good video during my LS swap... didn't happen, too much work to do both at the same time, so I can appreciate this!
#10
Member
Thread Starter
Join Date: Jun 2001
Location: new york , n.y. , USA
Posts: 397
Likes: 0
Received 10 Likes
on
10 Posts
Car: klowny1969 <-youtube 4 3rd gen vids
Engine: subscribe to klowny1969 on youtube!
Transmission: subscribe to my channel on youtube
Re: UMI Tubular k-member install -- Fully Detailed Video
lol..thank you all..and yes it takes double the time to do the job with a camera in your face lol
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
NBrehm
Engine/Drivetrain/Suspension Parts for Sale
0
08-05-2015 07:57 PM