89 305 tpi firebird hose
#1
Junior Member
Thread Starter
Join Date: Sep 2014
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firebird Formula
Engine: 305 MFI
Transmission: Auto
89 305 tpi firebird hose
( 89 firebird formula 305 MFI) I replaced my fuel injectors because i have a warm idle issue but while replacing them i broke the passenger crankcase ventilation hose and have not been able to find a new one or a way to make one, any help would be great!!!! (In the picture it is the hose labeled "CCV")
#2
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,699
Received 748 Likes
on
507 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: 89 305 tpi firebird hose
You have to use 2 different sizes of hose and a connector. or find a NOS part
#3
Junior Member
Thread Starter
Join Date: Sep 2014
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firebird Formula
Engine: 305 MFI
Transmission: Auto
Re: 89 305 tpi firebird hose
Do you know what size connector because I've been looking for 3/8 to 1/2 and have found nothing, maybe I measured wrong ?
#4
Supreme Member
iTrader: (5)
Join Date: Nov 2010
Location: Mantua NJ
Posts: 5,826
Received 64 Likes
on
57 Posts
Car: 1 Owner 1986 TA with a WS6 package
Engine: 5.0 EFI
Transmission: THM700R4
Axle/Gears: 277 Posi Speedo
Re: 89 305 tpi firebird hose
The P/N for that hose is, 10105290 and I can't find anything or anywhere on it.The P/N may have changed but they usually give you the New P/N.Your most likely going to have to make one or pic one up from the "Parts For Sale" Threads
#5
Supreme Member
iTrader: (2)
Join Date: Apr 2000
Location: Huntsville AL
Posts: 3,938
Received 97 Likes
on
62 Posts
Car: 88GTA
Engine: 5.7TPI
Transmission: Auto
Axle/Gears: 3.27
Re: 89 305 tpi firebird hose
Get a length of vacuum hose that size. Stick a straight piece of TIG welding rod (Stainless) through it, now use your old hose as a guide and bend the new hose with the correct bends in it.
#6
Supreme Member
iTrader: (5)
Join Date: Nov 2010
Location: Mantua NJ
Posts: 5,826
Received 64 Likes
on
57 Posts
Car: 1 Owner 1986 TA with a WS6 package
Engine: 5.0 EFI
Transmission: THM700R4
Axle/Gears: 277 Posi Speedo
Re: 89 305 tpi firebird hose
On my 86 that part is Metal, maybe aluminum, with small hoses at each end.
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM