Hawgtied

Hello to all! I am new to the sight and may I say that you guys know your stuff!. I have a 89 Iroc with the L98 engine that I am trying to get started since it was obviously sitting for an extended time. I was replacing the fuel filter last Sunday and I twisted off the end of the hard line coming from the tank to the filter inlet. Now I cannot install the new filter. Has anyone had this issue? I went to the auto parts store and have searched the web looking for this piece but have had no luck. Any input would be appreciated greatly.

ferret lady

It might be a good idle to get some new fuel lines. You can get new lines from places like Classic Tube. And if you decide to replace them you should also do the brake lines while your at it. And don't forget the rubber hoses.

85Special

I'd recommend replacing the lines, but brass crush fittings could be used for a patch.

killer777

I'd replace the lines.

Hawgtied

Okay so it looks like I'll be replacing the lines to be safe. What manufacturer or distributor do you guys recommend? Classic Tube web site has no mention of prebent lines for f-body 3rd gens.

alex722607

iTrader: (3)

I have those lines- all of them that I removed from my 88 GTA when I LS1 swapped the car.

If you want them PM me. The only problem I can forsee is the shipping.

My lines were all in tact and are in very good shape other than needing the overspray from paint removed

Hawgtied

Thanks alex722607! PM sent

alex722607

iTrader: (3)

Hi, I never got your PM

Hawgtied

The rubber flex end goes toward the tank. The hard line goes to the inlet of the filter


Here is the part I am looking for.