jayman350

Hey everyone,
I am getting ready to put my 350 in and I was wondering what kind of plug wires everyone was running and if they were happy with them.
I have edelbrock shorty headers that I am putting on so I will most likely be buying boots for the wires so they don't burn up.
Any suggestions as to which ones I should pick up or stay away from?

------------------
Jay

black 85 Z28, t-tops, 4bbl carb, flowmaster 80 series muffler w/ custom tips (hollowed out cat), edelbrock chrome air cleaner, B&M Megashifter Infinity 4" 2 way front speakers and Infinity 3 way 6x9s, Alpine CDA-7863 head unit. MacEwan motorsports white gauge overlays, blue Xenon bulbs. many more mods planned (350 4 bolt main w/ holley 4160 and edelbrock performer RPM intake coming very soon)
Jay's webpage
No car with 4 doors is a sports car! this goes back to my friend comparing his Maxima to a Camaro

GregWestphal

iTrader: (1)

I have the Taylor Spiro-Pro 8mm wires that are cut-to-fit and have the 90-degree boots. You'll probably want to re-route your wires around the headers, which is why it's good to get cut-to-fit wires. With most headers, it's necessary to get 90-degree boots to avoid burning the plug wires. I have the Made For You plug wire looms and they work great.

------------------
Greg Westphal
'87 IROC 305TPI/A4

Mkos1980

iTrader: (8)

I also have the Taylor Spiral Pro 8mm with the cut to fit 90* boots and love them.

89GTA350

I use the Taylor Spiro Pro too.

83_TA

I too use the Taylor Spiro....

KW87GTA

I use MSD Super Conductor wires, and I also have the edlebrock headers. They are great wires and I have not burned one. I have had them on the car for a few years now, and I recently took them off to check their resistance. These are the lowest resistance wires on the market, with only 50-60 ohms per foot. When I originally put them on, I could feel a nice increase in throttle response and maybe even a small power increase. All in all a great wire that lasts for $65.

Jza

I have Taylor Spiro Pro 8mm with Moroso wire looms. They're great.

WS6 Berlinetta

I've got the 8.5 mm MSD Super Conductors with the Edlebrock TES headers. I got the cut to fit set. I had one resting on a primary for a few weeks when the loom melted and it wasn't crisp at all. My old Accel wire fried not even touching the headers. I'm running bosch platnum plug because the are short enough to work with the fat boots on the MSDs.

R

------------------
'84 360ci WS6 Berlinetta
Fastest Berl In Cali
WWW.SDFB.ORG

Steve91Z28 L98

I have the Holley Annihilator wires on my car. They are 9mm and are actually manufactured by Delphi (it says it on the wire). I am very happy with them

Randy92Z

iTrader: (3)

I have Taylor 409 wires and made for you looms for center bolt valve covers, I also have the Edelbrock headers w/o A.I.R, so they look all pretty in stuff.

------------------
Convertible, L98, Mini-ram, ZZ9 cam, Comp Cams 1.6/1.52 steel roller rockers, Trick Flow 23* heads, K&N's with chopped airboxes, March underdive pulleys, Edelbrock ceramic coated TES, Flowmaster cat-back exhaust, Dynomax high flow converter, Accel box & coil, Taylor 409 wires, Fastchips custom chip, MAC sub frame connecters, Lakewood LCA & Adj. Panhard rod, SLP 2500 stall, 3.23 rear gears, 1LE aluminum driveshaft, white face gagues, and NOS!

b92z28

d.u.i live wires here and i love them. they have a kevlar wrap the whole length of the wire and havent burned up in 2 years. one even road on the header for a good month. just turned the kevlar a little brown.

------------------
92 z28 170,000 miles 14.20 on goodyear eagles before exhaust only mods k&n and slp 13/4 headers and dual 2 1/2 exhaust
87 trans am 12.20 on motor too many mods to list

ede

i have msd on my race car, moroso blue max on the iroc, accel 300+ on my sons 355, stock gm wires on my 68 and my jimmy, and moroso blue max on my gravely mower.

------------------
ICON Motorsports
1st & 3rd
MM Black Diamond 538 F&AM

'87FAKE-IROC-Z

Accel 8.8 300+.
Don't know what to think yet cause i have ignition problems. I can say they are built tough, and look very cool.

------------------
'88 RS (originally 2.8)
-350, .040 over, vette alum. L98s, stock tpi.
-305 injectors & chip
-TES headers & edelbrock cat back
-3.73 gears, 700r4.
Best with 2.8-17.4@77mph
Best with 305-15.0@93mph
Best with 356-13.7@101mph
on a 2.050 60 ft.
(Damn the 2.8!)