super ram help
#1
Junior Member
Thread Starter
Join Date: Apr 2004
Location: louisville,ky
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 firdbird formula
Engine: 5.7 tpi
Transmission: 700r4
super ram help
i was trying to install the super ram on my workbench. I could not figure out how to bolt the coil, and the egr bracket on to the intake. Do i need the heads or block to do this or is there any other parts i'm missing. pics would be helpful and this will be installed out of the car. also what is the 90 degree brass fitting for? This is going on a 1992 formula
#2
Senior Member
iTrader: (3)
Join Date: Jul 1999
Location: Long Island, NY
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 GTA
Engine: 645hp/656 ft lb Blown 383
Transmission: 700-R4 3,000 stall
Axle/Gears: 3.55 moser 12-bolt
the back passenger intake manifold bolts hold the bracket onto the motor. You need to install the heads, then the intake and put the bracket on those rear two bolts before torqing the intake manifold bolts.
#3
Supreme Member
iTrader: (2)
Join Date: Jul 2003
Location: Dallas, TX area
Posts: 3,205
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
Correct. And the 90* brass fitting os for the vacuum port on the back driver's side of the plenum so you can run the vac line to the power brakes booster. Ask me how I know......
#4
Senior Member
iTrader: (3)
Join Date: Jul 1999
Location: Long Island, NY
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 GTA
Engine: 645hp/656 ft lb Blown 383
Transmission: 700-R4 3,000 stall
Axle/Gears: 3.55 moser 12-bolt
yeah i have three other ports that I am using for the boost retard, boost gauge, and AFPR. (all in the back of the manifold by the distributer)
#5
Supreme Member
iTrader: (2)
Join Date: Jul 2003
Location: Dallas, TX area
Posts: 3,205
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
Sounds like a killer of a set up!
Let us know if we can help in any other way on your SR....
Let us know if we can help in any other way on your SR....
#6
Senior Member
iTrader: (3)
Join Date: Jul 1999
Location: Long Island, NY
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 GTA
Engine: 645hp/656 ft lb Blown 383
Transmission: 700-R4 3,000 stall
Axle/Gears: 3.55 moser 12-bolt
yeah, purple bird,....what do you have as a setup? Hopefully I'll fire mine up in 2 weeks!
#7
Junior Member
Thread Starter
Join Date: Apr 2004
Location: louisville,ky
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 firdbird formula
Engine: 5.7 tpi
Transmission: 700r4
i'm going with a supe ram with the stock heads ported and matched to the heads and also a 3 angle valve job . i will be going with a mild cam and 3.73 gears.
i notice that on the front of the intake manifold it has three threaded holes. i could only find a senor and a water bolt that goes there. what is the other hole for. what sould i do with it. Also i would like to see some pics of the egr bracket and egr monted on the car
Thanks a lot
i notice that on the front of the intake manifold it has three threaded holes. i could only find a senor and a water bolt that goes there. what is the other hole for. what sould i do with it. Also i would like to see some pics of the egr bracket and egr monted on the car
Thanks a lot
Trending Topics
#9
Senior Member
iTrader: (3)
Join Date: Jul 1999
Location: Long Island, NY
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 GTA
Engine: 645hp/656 ft lb Blown 383
Transmission: 700-R4 3,000 stall
Axle/Gears: 3.55 moser 12-bolt
oh, let me look tonight, yeah one is a sensor ane one is a water hose from the firewall....i know what you are talking about,...i'll look in a hour or too. i thought you meant the back....
#10
Senior Member
iTrader: (3)
Join Date: Jul 1999
Location: Long Island, NY
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 GTA
Engine: 645hp/656 ft lb Blown 383
Transmission: 700-R4 3,000 stall
Axle/Gears: 3.55 moser 12-bolt
2 sensors and 1 water jacket:
the first sensor is a 2 wire one with a injector style clip....the other sensor is a regular 2 pin clip which looks like yellow/blk wires /// the water goes to your heater core.
the first sensor is a 2 wire one with a injector style clip....the other sensor is a regular 2 pin clip which looks like yellow/blk wires /// the water goes to your heater core.
Thread
Thread Starter
Forum
Replies
Last Post
no green
Engine/Drivetrain/Suspension Parts for Sale
11
01-09-2016 09:22 PM
Dragonsys
Engine/Drivetrain/Suspension Parts for Sale
2
09-25-2015 03:51 PM