HSR reg. problem
07-27-2006, 04:46 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2004
Location: Chouteau, OK
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Car: Bitchin' 92 RS
Engine: 350 TPI
Transmission: 700R4
HSR reg. problem
Ok, I have my HSR installed, and everything is hooked up, when I crank the engine, my pump comes on and is working properly, plenty of pressure. but no fuel is getting past the regulator. what could be causing this?
Kyle
Kyle
07-28-2006, 08:10 AM
#4
TGO Supporter/Moderator
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,732
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Originally Posted by RebelRacer
Ok, I have my HSR installed, and everything is hooked up, when I crank the engine, my pump comes on and is working properly, plenty of pressure. but no fuel is getting past the regulator. what could be causing this?
Kyle
Kyle
-- Joe
07-28-2006, 11:43 AM
#5
Supreme Member
iTrader: (1)
Join Date: Apr 2004
Location: Browns Town
Posts: 3,178
Likes: 0
Received 3 Likes
on
3 Posts
Car: 86 Monte SS (730,$8D,G3,AP,4K,S_V4)
Engine: 406 Hyd Roller 236/242
Transmission: 700R4 HomeBrew, 2.4K stall
Axle/Gears: 3:73 Posi, 7.5 Soon to break
Originally Posted by anesthes
Any chance you have the feed on the wrong line?
-- Joe
-- Joe
07-28-2006, 03:38 PM
#6
Senior Member
Thread Starter
Join Date: Sep 2004
Location: Chouteau, OK
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Car: Bitchin' 92 RS
Engine: 350 TPI
Transmission: 700R4
from what i've read, the larger hose, 8an I think it is, is the feed line and the smaller is the return, is that correct?
07-28-2006, 08:02 PM
#7
Check to insure that you have the lines going in the right direction. I have my feed line going into the back of the passenger rail and it returns out the regulator back to the tank. My adjusting screw is also facing out for easy adjustments. The regulators that holley supplies with their HSR kits are known to fail. Most guys replace them with a Kirban regulator. Any FPR for a GN will fit the HSR IIRC.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
86CamaroDan
Engine/Drivetrain/Suspension Parts for Sale
2
09-29-2015 10:08 PM
