kubus_stroinski

Before anybody says anything, I've been searching for about 30 mins and cant find anything. Im thinking about getting some C6 chrome wheels and was wondering if anybody has a picture of them on a third gen just so I can see what they look like before I get them. I'm worried the spokes might look too thin on a thirdgen. Thanks!

Kubus

rwdtech

there is a dude with a red 91 RS with those wheels...i have the pic saved somewhere. i will post it as soon as i can find it

kubus_stroinski

thanks a lot!

MetalliCamaroRS

iTrader: (15)

I searched "C6 Rims" on this board, and these were right at the top:

https://www.thirdgen.org/forums/auto...hlight=C6+Rims

https://www.thirdgen.org/forums/auto...hlight=C6+Rims

rwdtech

sorry it took me so long, this is the only pic i have also
u might wanna open it in a different window, its been TGO resized

kubus_stroinski

Thanks a lot for that. I really like them and I think I'm going to order them

Grizzlee

You mean these rims

Fastcamaro87

Grizzlee,

How wide are those wheels? and what size adapters did you have to use to get them to fit?

also what are the tire sizes you have on there?


thanks
Matt

kubus_stroinski

Those are beautiful. I just ordered them 30 seconds ago. Now to get some spacers.

rwdtech

dang u must be loaded. how much did you get them for?

oh and another thing, the rear wheels are 20 inch, i hope that wont give the car a rake. how much lower profile can you go in the back... i wonder if 4 front wheels would work

EDIT: you can get 19x10.5, still seems a little too big for my tastes

kubus_stroinski

i paid 1341 i think with tires. 4 spacers were an additional 118. im too tired to add that right now but thats how much i paid. hope they arrive soon so you guys can see what they look like. do i need to lower the car? nobody has replied to my other thread so ill just ask here

rwdtech

what size tires did you get? it will mess up your speedo if you dont get the same overall diameter. i just saw an auction for 17x8.5 and 18x10.5 wheels, if i get wheels, those would be it

would 17x8.5 be too wide up front? dont the tires rub even if you have 255/50/16 tires up front

kubus_stroinski

i got 17x8.5s all around. With a 2 inch adapter they are supposed to be fine. I got the 245/45/17 tires

Grizzlee

My tires are Nitto 555's 17"s 255/45 and I do believe the rims are 8.5 (all the way around) with 2" spacers (Skulte Performance Designs - Skulte Performance Designs) no problems, I have to change out the speedo gears though (already have them from 700R4.COM - Bowtie Overdrives)

And for you Canadian Third GENERS my wife found this place where we bought the wheels and tires (wheels mounted, balanced, free shipping "at least in B.C." and free tire wrench)

Wheels West

purpleZ-28

those are 17"s? they look good. do they make them in 17's but wider?

rwdtech

17x9.5 is the widest you can get i believe

EDIT: i just got an email back from Bones Enterprises (they sell the C6 wheels in many variations on ebay) and they gave me a link eBay Motors: 17 CORVETTE CAMARO FIREBIRD CHROME C6 RIMS WHEELS TIRES (item 250013954645 end time Aug-30-06 19:35:18 PDT) this seems like a very good option for me (17x8.5 front, 17x9.5 rear) im going to ask if i can get them without tires mouted because im sure i can find tires on my own and more suitable to my needs. would these rub up front? 17x8.5 with a 255/45/17????

Phyte

Nice choice. I went with the C6 Z06 wheels in 18x9.5 w/ 275/35/18 and a 2.25" spacer.

petro200

iTrader: (1)

I am very concerned about the unsprung weight of these rims. I have seen on the corvette boards that these wheels are very heavy compared to stock camaro rims. Has anyone noticed a bit of performance loss in acceleration with these wheels? If these rims are even 10lbs heavier that is 10 x 4 wheels times 4 = 160lbs weight increase to your car. I think that they look great but i dont want any performane loss. I wish I would have looked into this a little more before I purchased.

Yellow87Cam

I have 18x9.5 ZR1 rims with 245/40/18 toyo tires and they dont rub...but i wouldnt go any bigger cause they look like thats the biggest they can fit

rwdtech

you have those up front!?

Yellow87Cam

yea hahah i bought 18x9.5 all around...they look good though not bad at all

rwdtech

you can tell they stick out though

87CIZ

iTrader: (8)

actually they look like they are just inside the lip of the fenders... and wheel width has nothing to do with how far out your wheels sit out from your car. BTW the C6 Z06 wheels are my favorite vette wheels, love those wheels.

Firebat

iTrader: (7)

one thing you might want to consider about the 18x9.5 c6 ZO6 motorsport replica rims, they weigh 32 lbs a piece.

LS1TECH - Common Wheel Weights

Yellow87Cam

I dont think they stick out as much as i thought they would there actually pretty nice...try throwing 18x10's in there and then they will stick out, i dont even know if 18x10's will fit

TraviZ

iTrader: (2)

dang that is nice. what color is that considered?

Phyte

Stock GM red It's original paint.

Phyte

compuwiz1937

iTrader: (17)

I think he was talking about the wheels.

Those look really good on that car BTW.

TraviZ

iTrader: (2)

Yes the wheels, is it the lighting or are they some sort of darker grey color?

Phyte

Lol, my bad You can only get the Z06 knockoff's in chrome or "hyper silver". Mine are obviously hyper silver. It depends on the light, but they can get pretty dark. I'm seriously thinking about getting them powder coated a lighter grey color to match more of a aluminum look.

TraviZ

iTrader: (2)

Can I ask what spacers you have to go with on those 18x9.5's?

fire350tpi

i believe he said 2.25

rwdtech

waiting for more pics of red camaros with C6 wheels....

carguy502

iTrader: (2)

Those C6 Z06 wheels are hot. I need a set for my ride. Do they come in any other widths?

kubus_stroinski

fmacon1992

when i was looking for mine i believe i seen 17, 18 and 19s with widths from 8 to 10.5 inches