Fuel lines
Thread Starter
Junior Member
Joined: May 2024
Posts: 5
Likes: 0
Re: Fuel lines
Would this work?
https://www.racetronix.biz/p/adapter...adf-6jm1615sgf
what sizes do i need for feed and return?
https://www.racetronix.biz/p/adapter...adf-6jm1615sgf
what sizes do i need for feed and return?
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
Re: Fuel lines
Be sure to use a modern line for these. No common CPE lined SS braided. They will weep fuel fumes like no tomorrow. There is either PTFE lined hose or Viton lined hose that works with fuel.
RBob.
RBob.
Supreme Member
Joined: Feb 2005
Posts: 2,509
Likes: 201
From: Hawaii
Car: 89' Firebird / 87' Formula
Engine: 3.4 / 5.0
Transmission: 700-R4
Axle/Gears: 3.42 / 3.42
Re: Fuel lines
I did this. I used these fittings / lines: for a TPI motor as I could not get the OE rubber lines:
I only have3 one part number for one fitting atm but you need 2 sizes... I beleive it is 16 and 14mm
EAR-AT9894DBHERL
Fragola Performance Systems 6000 Series PTFE-Lined Braided Stainless Pre-Made Hoses 6026-1-2-12BL
I only have3 one part number for one fitting atm but you need 2 sizes... I beleive it is 16 and 14mm
EAR-AT9894DBHERL
Fragola Performance Systems 6000 Series PTFE-Lined Braided Stainless Pre-Made Hoses 6026-1-2-12BL
Thread
Thread Starter
Forum
Replies
Last Post