About 10 years ago there used to be a guy around here that had chrome wheel spinners on his GTA. I loved the look of those wheels!!!! He sold the car and I never saw it again. I wanted to see what it looked like on other GTA's..... (Mine's Flame Red) Does anybody know where to get them by any chance? Just out of curiosity...

you can just about buy them from any wheel maker....or look on ebay....i have seen a couple on there

yeah you can get them on any SUV or p.o.s car that is lifted to accommodate them...seriously if your going to put spinners on a gta please just sell your car and get a crap car and spend more on rims than you do the car.....if your going to do that just sell your car its a disgrace.

Wait a minute...... I'm serious when I say that the chrome spinnner looked good in the gold laced GTA rim.
The chrome outer ring with the chrome spinning center looked great / even at a standstill!!!. I know most cars look cheap with them but this didn't!!!!!!

*pukes in mouth*

im sure he means the 3 spoke old school spinners not the dub, tis or the mht spinning wheels...... and not every person on this board shares your point of view so keep your head opened wide because some of those "P.O.S" are built in a flawless manner. now if he meant those 24" wheels which he did not f-it is his car right!!

Wow.... I wasn't talking about blinged 22"s with a rotating outer plate! & I wasn't looking for opinions either!!!!

I wanted to know if someone had pics of a knock-off center cap 3 spoke spinners on their GTA. Don't knock it until you've seen it.

i have seen some on a burgandy firebird formula i believe across the street but it has centerline auto drags on it i think anyways they dont look bad. -Matt

i've never been a fan of the riced out sppinners but i'm actually a little interested in seeing what your talking about,

not for me but it's your car, do as you please, don't let anybody stop you or talk you out of it

i dunno man they usually look realy bad on ANY car, I'd have to see a pic to make a judgent

OK....Now the he posted what he was referring to, lemme clarify for everybody.

Those small 3 spoke ones do not spin/rotate, like "dub spinners" do.

The term "spinner" was ORIGINALLY a reference to the 3-spoke design. When quick-change wheels were put on, like NASCAR-type quick change.....The wheels did not use 5 lug nuts. They used 1 LARGE nut (3-spoke spinner) to hold the rim onto the hub. Basically, the spindle nut was what held the wheel on.

THAT is what he was referring to by "spinners". The 3-spoke design only pops in like a standard center cap & DOES NOT ROTATE/SPIN. It stays stationary, in reference to the rim face.



With that said...I can kinda see what he was referring to. With the car driving, the gold wheel would have the polished lip & then a polished/chrome center. In motion, the 3-spokes would create a single silver circle. Still not sure I'd like such a large silver center, but who knows? It might look good. And as long asHE likes it, that's what counts.

Unless he meant 22" dub with those BIG modern spinners, then yeah... OUR opinion matters more! (but i know he didn't mean that)

I'm talking about the knock off "INDY" center caps on post #8 Guys....

It's funny how a 30+ yr old know will know what I'm talking about and a 16 yr old kid thinks I'm wanting pics of some hubcap that spins while the rim isn't moving (PUKES IN MOUTH)

Anybody out there find any pics? I haven't been able to find any nice ones that are third gen related.....

I can't say that I have ever seen them on a more modern car but put them on a 67' vette with a 427/435 and you have a piece of art.

Phil

I know what you are referring to, but its been a long time since I've seen them on a car.
Actually, I believe the gone in 60 seconds car had them on its wheels.

Oh thank god, I thought you were talking about the other kind spinners when I first read the title.. phew..

You can't blame anyone when you say "Post Pics Of Your Chrome Wheel Spinners!!!" it's like a neon sign saying "i'm about to make a thirdgen into a pimp-rust-moible". Sorry
I think they'll look good. I wanted to put them on my camaro when I had my other rims. I figured that our cars have a older look to them to pull it off but I never got to do it.
best idea is to get a side shoot of your car and photoshop them on. If you don't have photoshop, post the picture and i'd be happy to do it for you or someone else can do it.

lol theres so many *******s on this board, people flame without even knowing what the dude is talking about

This is not my car..... I don't think I have any side pics that would be any good, and the picture of the wheel with the center knock-off is the closest I could find on a wheel...... that wasn't a mustang rim that is.....

Maybe someone could photoshop one of the above links onto the GTA rim... I'm looking for a chrome center piece...

I guess this is the closest we can get until the appropriate member (somebody with Chrome 3 spoke knock-off center caps on a Gold GTA rim) sees it

for taking the time guys

Here is just those wheels photoshoped on that car. Mite do the other thing later if I got time. also that was done in about 2 min so not the best job but you get the idea.

Thanx RS Reaper, but the wire rims don't do the idea justice..... it was the best picture that I had found though.
Is there any way to photoshop the 3 spoke spinners from post #8 onto those GTA Rims, maybe then some would get the idea......

Maybe I'll just end up goin over to the guy that had the original GTA with the chrome centercaps...... he should have a picture somewhere I'm sure. The car was a 9/10!!!!

Thanx for the help.

Don't get me wrong~!!!!!! I do think that those wire rims look rediculous!!!!!!!
I think that you'll appreciate the look once you see it proper!!!!

I love the attacks before anyone knew what he was talking about...

Anyway, for those knock offs, you can probably get them from American Racing, but I found these http://cgi.ebay.com/ebaymotors/1-CAR...mZ180294414501 on eBay.

Is this kind of what you had in mind?

SWEEET!!!!!!

Now thats exactly what I'm talking about thanx mang!!!!

Can you see it now..... huh???

I was tellin ya it looked sharp! Now I realize that everybody has a different tastes but that's hot ......... standin still or moving!!!!

I'm not feeling it.....But as long as YOU are happy with YOURcar, thats what counts.

You gonna get some?

hahaha, I just today noticed a guy at my church had them on his old Corvette.
Tryed to get it to more of what you wanted.

Yeah, they're not for me, but everyone's got different tastes. If you like them, I'm sure you could find some pretty cheap on eBay.

Thanks RS Reaper for taking the time to photoshop that stuff for me.

The center section on the GTA rims have a 3 1/8th" outer diameter so I'll have to find something with the same diameter to fit over the top.... The only knock of spinners I've found so far are 3"

I don't know if I'll ever get those spinners but I figured that I would find somebody here with a picture of them....

If I ever do get them, I'll be postin pics and be the first. Thanx once again guys!!!!

I love them.. I would love to put some of those on my car

my neighbor has a yellow 86 iroc which had its original wheels stolen (po came out one day and the car was on blocks) so he got a set of gold gta wheels and painted the gold part yellow to match the car and he has those 3 "spoke" spinner knock offs on em and im not lying when i say it looks freakin bad ***! course it helps that the car has 400 ci under the hood ill get some pics next time im over there

Maybe it's the color scheme that has ruined it for ya.....? Maybe it was on the wrong car, a Camaro and all....

Maybe it was the red with chome and gold that did it for me......? On a slightly different body line, being the GTA... I don't know...? Like I said it was 10 years ago.....

I wouldn't mind seeing the pictures though.

i think you misunderstood me, i ment it looked freakin awesome and i have been lookin for a set for my car ever since lol
also i dont know what look your exactly going for but a search on summit racing finds these two:
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku

Opps i totally misunderstood ya...!

I thought that this particular GTA looked sweet too.... The outside diameter of the GTA center is 3 1/8th" Unfortunately the American Racing spinners don't have dimensions on the Summit site.

I'm still interested in the Camaro pics just the same......

hes away at work right now, not sure when he'll be home but the cars sleeping in his garage so i cant see it lol

to be honest it looks like its dreaming

oh man ive wanted to know the back story on my car for awhile lol

here is a pic of my 1st 3rd gen. Picture is from 1988 so the photo detail is low, but it had the 3 spoke spinners and I loved them.