Fiberglass Woofer Box - Progress Pics
#1
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
Fiberglass Woofer Box - Progress Pics
Progress on the all fiberglass woofer box and Previous woofer box.
Mask, Foil, and Plastic!
Mask, Foil, and Plastic!
#2
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
Foilded all the inside and tapped it.
PS Redbird; the tech article says to use adhesive to glue another layer of tinfoil ontop of the tinfoil so it's stronger, (I remember you asking) (I didnt do that)
PS Redbird; the tech article says to use adhesive to glue another layer of tinfoil ontop of the tinfoil so it's stronger, (I remember you asking) (I didnt do that)
#3
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
Then Cut some of the Fiberglass MAT into roughly 7 x 5" strips.
#4
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
Layed the mat and resin
#5
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
Another pic of the glass laid.
roughly 10 more pics they are only 10-20KB each so it shouldn't hurt 56kers too bad. (I know I need a site, and I will get one)
roughly 10 more pics they are only 10-20KB each so it shouldn't hurt 56kers too bad. (I know I need a site, and I will get one)
#6
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
This is my old sub box
It weighed alot. Had about 3 cubic feet of volume (Way too much for sealed!) The new fiberglass box has a volume of 2.457cuFT.
I Had to trim, (used the grinder!) to grind away some of the board so my new subs would fit. we had to grind OVER half way through the MDF
It weighed alot. Had about 3 cubic feet of volume (Way too much for sealed!) The new fiberglass box has a volume of 2.457cuFT.
I Had to trim, (used the grinder!) to grind away some of the board so my new subs would fit. we had to grind OVER half way through the MDF
#7
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
Woofergrindaway.jpg
This shows where I had to grind my old box so that the speakers would fit, But they still didnt fit very well.
You can't really tell in this pic, but if u look hard enough you can see.
This shows where I had to grind my old box so that the speakers would fit, But they still didnt fit very well.
You can't really tell in this pic, but if u look hard enough you can see.
Trending Topics
#8
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
This is comparing my Old 2x 12" sony's to my New 12" Comp THump!'s
#9
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
Comparing the two subs again, Showing the to pof the magnets,
The thump!'s come with a sweet-looking cover over the magnets.
That would look sweet to show off.
The thump!'s come with a sweet-looking cover over the magnets.
That would look sweet to show off.
#10
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
The rubber surrounds, The Thump!'s surround is way bigger than the sony's with allows the woofer to excurt more?? Too bad my car wasnt yellow :P
#11
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
Again, Comparing the two speakers, (I am almost done!)
The Thump! sub is a Giant compaired to the puny SonY.
The Thump! sub is a Giant compaired to the puny SonY.
#12
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
This is my old box setup, It wasn't even air tight because there was a gap that was between the sub rim and the MDF because the woofer couldnt fit all the way down. And they STILL owned the sony's!!!
#13
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
Again, another pic of the old box setup that my the rear end of my car Sag, and bottem out from the weight.
My fiberglass box is superlight with only one layer, will still be light onece I get 2 or 4.
I'm guessing 12-18lbs. compared to 50-80lbs of my old box.
My car manual says max cargo capacity is 60 lbs or sumtin'
My fiberglass box is superlight with only one layer, will still be light onece I get 2 or 4.
I'm guessing 12-18lbs. compared to 50-80lbs of my old box.
My car manual says max cargo capacity is 60 lbs or sumtin'
#14
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
This is my Concept cc-1002 amp that I scored for 400 bux, regular 800 (canadian prices) check them out!!!! www.conceptconcept.com
The amp is 250x2 at 2 ohm , or 500x1 at 2 ohm RMS.(whut i run it) and it doesnt even get hot! it's cold when I touch it.
The amp is 250x2 at 2 ohm , or 500x1 at 2 ohm RMS.(whut i run it) and it doesnt even get hot! it's cold when I touch it.
#15
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
I need a new one of these, PResvious owners put the sticker on and I cant get the bitchen thing off! ( the real bird logo under it is broken)
Oh well, no one really notices it.
Oh well, no one really notices it.
#16
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
This is the sideview of the 1986 Base model Bird;
Rally rims, I wanna get ridda 'em
Rally rims, I wanna get ridda 'em
#17
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
enjoy the novel lol.
#18
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
TTTTTTTTTTTTTTTTTT
#19
Supreme Member
Join Date: Sep 2001
Location: Manassas, VA
Posts: 4,231
Likes: 0
Received 1 Like
on
1 Post
Car: 89 Formula Firebird
Engine: 305 - Demon 525
Transmission: 700R4
Those thumps are really good speakers? They might be but I know they do make some real cheap stuff. I bough the lowest model at a pawn shop who sold them brand new to bank some extra $. Man they blew with the quickness. They were like 10 bucks brand new. LOL I just had to buy it to find out what that was about. I guess just looks. I'm sure they have good stuff but they also have real bad stuff.
#20
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
they make 'good' and bad stuff....
These seem to take the power good.
Mobile Authority sells them, but I think myne were made before mobile authority came in cause it says they are made by a different company on the box
These seem to take the power good.
Mobile Authority sells them, but I think myne were made before mobile authority came in cause it says they are made by a different company on the box
#21
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
ttt
#22
Supreme Member
Join Date: Sep 2001
Location: Manassas, VA
Posts: 4,231
Likes: 0
Received 1 Like
on
1 Post
Car: 89 Formula Firebird
Engine: 305 - Demon 525
Transmission: 700R4
ttt huh? Ok well I got a question. How did you attach the top to the glass. I was wondering how to do that when you just lay the sheets in there.
#24
Supreme Member
Join Date: Sep 2001
Location: Manassas, VA
Posts: 4,231
Likes: 0
Received 1 Like
on
1 Post
Car: 89 Formula Firebird
Engine: 305 - Demon 525
Transmission: 700R4
Originally posted by CAMp3RO
wanna see a pretty sub? here's my type-r on top of the old box. mmm, cast baskets.....
wanna see a pretty sub? here's my type-r on top of the old box. mmm, cast baskets.....
#25
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
Originally posted by redbird_400
ttt huh? Ok well I got a question. How did you attach the top to the glass. I was wondering how to do that when you just lay the sheets in there.
ttt huh? Ok well I got a question. How did you attach the top to the glass. I was wondering how to do that when you just lay the sheets in there.
#28
Supreme Member
Join Date: Sep 2001
Location: Manassas, VA
Posts: 4,231
Likes: 0
Received 1 Like
on
1 Post
Car: 89 Formula Firebird
Engine: 305 - Demon 525
Transmission: 700R4
Originally posted by mike1986fyrbird
I have no adea whut ur saying?
I have no adea whut ur saying?
#29
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
my box isn't done yet, thats my old mdf box in there.
#30
Junior Member
Join Date: Oct 2002
Location: Ontario canada
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
thump subs arnt as good as they say they are i got 2 had them in my car there 1000watts each i was pumping a 1500watt amp and boy they would always bottom out blah stupid pyrimid stuff
#31
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
I know they arnt good subs, but they beat the **** out of my sony xplodes, and I got them cheaper!
#33
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
yeah. You were over powering them man. The subs are only 500 WAtt RMS. 1000 Watt peak... that explains the botteming out...
#34
Junior Member
Join Date: Oct 2002
Location: Ontario canada
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
ohh ok i still got them in my old box had a kenwood mono amp running them they were ok but i dunno not to interested in the pyramid stuff anymore used to be since there stuff is cheap but then when u buy cheap stuff what do u expect but then again theres people that spend $1000's of dollars and they think theres sucks heh
#36
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
cool. Pyramid dont make them any more. Its Mobile Authority or something.
But still... good for the price. How much did u pay per sub? I pad 50 bux canadian.
But still... good for the price. How much did u pay per sub? I pad 50 bux canadian.
#41
Supreme Member
Join Date: Sep 2001
Location: Manassas, VA
Posts: 4,231
Likes: 0
Received 1 Like
on
1 Post
Car: 89 Formula Firebird
Engine: 305 - Demon 525
Transmission: 700R4
Originally posted by Kj Rockz
Holy Sh*T
Holy Sh*T
hey, an appearance and detailing *****. What are you doing over here *****? just ing Uhh... I beter say something usefull before someone tells me I'm a *****. What kinda speakers do you use to play in that band? And what happen to the pix?
#44
Supreme Member
Join Date: Sep 2001
Location: north plainfield,nj,usa
Posts: 1,841
Likes: 0
Received 0 Likes
on
0 Posts
i wounder if u can use a car audio sub in a bass guitar amp. becuz i have a 15'' speaker or what ever u call it in my bass guitar amp and its pretty good but i want more, and the entire amp is 115watts and i got the entire thing and in great condition for 150 bucks.
#45
Supreme Member
Join Date: Sep 2001
Location: Manassas, VA
Posts: 4,231
Likes: 0
Received 1 Like
on
1 Post
Car: 89 Formula Firebird
Engine: 305 - Demon 525
Transmission: 700R4
Originally posted by 1982chevycamaroz28
i wounder if u can use a car audio sub in a bass guitar amp. becuz i have a 15'' speaker or what ever u call it in my bass guitar amp and its pretty good but i want more, and the entire amp is 115watts and i got the entire thing and in great condition for 150 bucks.
i wounder if u can use a car audio sub in a bass guitar amp. becuz i have a 15'' speaker or what ever u call it in my bass guitar amp and its pretty good but i want more, and the entire amp is 115watts and i got the entire thing and in great condition for 150 bucks.
I would say ney... unless you get some kinda real expencive sub. But I have heard real good stuff at guitar center. Those kinda speakers just seem to have the right range for a bass guitar. and BTW you have to post more that that man. What kinda Bass guitar, what kinda amp, any other equitment?
#46
Supreme Member
Join Date: Sep 2001
Location: north plainfield,nj,usa
Posts: 1,841
Likes: 0
Received 0 Likes
on
0 Posts
oh its a Yamaha (yea okay laff) 115watt bass amp, and i have a Fender P-Bass, and i use a fender guitar tuner (came free with the bass from Musician Friends.com) and of cousre the good old instrament cables. but besides that thats it. i have changed the strings to i think erinie paul or ball or what ever it is but i cant really remeber what stings i got last yr (i havent played much since then)
#47
Supreme Member
Join Date: Sep 2001
Location: Manassas, VA
Posts: 4,231
Likes: 0
Received 1 Like
on
1 Post
Car: 89 Formula Firebird
Engine: 305 - Demon 525
Transmission: 700R4
Yeah get the ernie *****. Thats all I play on my BC rich. I have that Warlock, A red kramer, White Arial Pro Cat Bass(only two strings on it now) Digitech RP12 FX processor, marshall amp, empty halfstack cab, Creative Extigy 24 bit 5.1 surround external sound card, some handy recording programs, this overpriced POS HP, and some neighbors to bother while I play my guitar through 3 8" spekaers (1 marshall, 1 fender, 1 radioshack replacement) 1 10 inch cerwin HED sub and two 12" cerwinvega floor speakers. All these speaker hooked up and jaming at the same time but they dont seem to care much.
>So who else uses ernie *****? Well check out this page. I tried to take a pic of the back of the pack which has about 50 names on it but the pic just isnt clear enough t read here.
http://www.ernieball.com/artist/
>So who else uses ernie *****? Well check out this page. I tried to take a pic of the back of the pack which has about 50 names on it but the pic just isnt clear enough t read here.
http://www.ernieball.com/artist/
#48
Supreme Member
Thread Starter
Join Date: Feb 2002
Location: Prince Albert, Saskatchewan, Canada
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am GTA
Engine: 357ci Stealth Ram - Under Pressure
Transmission: Built 700r4/Pro Yank 3400 Extreme
Axle/Gears: 9-Bolt 3.27
Guitars...
I HAD a guitar until some ****ing queer mother ****ers.... Broke into my stuff and stole allot of **** but not my pc.
This happened about a month ago...
They tryed to get in the front door and failed. So they took a ladder to the back window and got in. This Happend between 10AM to 4 PM!!!!!
All my parents jewelery was stolen ($3500) worth...
Video camera, bunch of other stuff, Business checks that they CASHED (we didnt know they stoll them, they were smart they took them from the back of the book) and a hole bunch of other miscilanious stuff.
Over $5000 worth of stuff gone, stolen, from my house.
Oh yeah...
And my Gibson Electric guitar...
We are getting everything replaced through home insurance.
Cept $1000 of the jewelery wont be replaced cause it only covered 2k worth..
This happened about a month ago...
They tryed to get in the front door and failed. So they took a ladder to the back window and got in. This Happend between 10AM to 4 PM!!!!!
All my parents jewelery was stolen ($3500) worth...
Video camera, bunch of other stuff, Business checks that they CASHED (we didnt know they stoll them, they were smart they took them from the back of the book) and a hole bunch of other miscilanious stuff.
Over $5000 worth of stuff gone, stolen, from my house.
Oh yeah...
And my Gibson Electric guitar...
We are getting everything replaced through home insurance.
Cept $1000 of the jewelery wont be replaced cause it only covered 2k worth..
#49
Supreme Member
Join Date: Sep 2001
Location: Manassas, VA
Posts: 4,231
Likes: 0
Received 1 Like
on
1 Post
Car: 89 Formula Firebird
Engine: 305 - Demon 525
Transmission: 700R4
Damn that sux! You could tie a shot gun to the ceiling with a trip wire on the ground. Also put the gunz on the windows. So the next time they try to break in....hehe..... But you cant get drunk ever! Cause that one time you forget BLAM! Hehehehehe..... I bet I could sell that kinda security to some crackhead. So are you getting another Guitar? What kind? Get a effects processor rack! Some pro audio monitors and a 24 bit sound card! Go to Guitar center if you have one and ask them to show you some shat. I could blow off all of that $ in about 5 minutes.
#50
Supreme Member
Join Date: Aug 1999
Location: Mililani, HI USofA Search Posts: 2848.............. Whore Posts: 47.................. Magical Whore Posts: 1
Posts: 3,534
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro 77K
Engine: 3.1 Vslick
Yo, we usually play with our Peavy's or whatever the house house.
Alot of the clubs here have there own setups...
Alot of the clubs here have there own setups...