What do I do with wiring harness after CARB swap
#51
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2014
Location: South TX
Posts: 200
Likes: 0
Received 1 Like
on
1 Post
Car: 92 RS
Engine: Sbc With h/c/i/e holly4150
Transmission: 700r
Re: What do I do with wiring harness after CARB swap
I removed stock in tank fuel pump and replaced it with a piece of metal fuel line with a sock on the end. Left the stock fuel lines to front of engine then ran new line to mech pump.
#52
Junior Member
Join Date: May 2015
Location: Pacific Northwest
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro IrocZ
Engine: 400 6.6l V8
Transmission: Turbo350
Axle/Gears: 3.0.7
Re: What do I do with wiring harness after CARB swap
Hello I just completely cut up a spare harness that I had due to the fact that it was set for electronic fuel injection. Does anyone get the Socket half/Pin half? Or if someone can make a youtube video on making a C100 Harness for carb set up from scratch would be awesome.
#53
Member
Join Date: Nov 2009
Location: new brunswick,can
Posts: 148
Received 0 Likes
on
0 Posts
Engine: 350sbc
Transmission: TH700R4
Axle/Gears: 3.42
Re: What do I do with wiring harness after CARB swap
There is plug that comes from the drivers side. With all gauges and starter,alternator wires. Trace the wires from there. And you should be good.
#54
Junior Member
Re: What do I do with wiring harness after CARB swap
Coming in late. I am doing a TPI to carb swap. I want to remove ecm harness from under hood. I understand that the fuel pump is powered by ecm. What so I have to keep to make it function. I already have a pro billet fuel pressure regulator with bypass so I can use factory pump. Thanks
#56
Junior Member
Thread
Thread Starter
Forum
Replies
Last Post