Air cleaner with a stock hood
#1
Junior Member
Thread Starter
Join Date: Apr 2014
Location: Southern Ohio
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28
Air cleaner with a stock hood
What kind or size air cleaner will fit under a stock hood with a performer intake and QJet carb?
Thanks
Thanks
#2
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Re: Air cleaner with a stock hood
A typical 14x3 with a 1.5" drop base. Kind you can find in the cheap chrome parts aisle at the local auto parts store.
They're not all built the exact same, though. You want to make sure that the base doesn't come into contact with the accelerator pump arm on the top of a QJet (check in throttle-closed and throttle-full-open positions). It's not uncommon to have to stack a couple extra air cleaner gaskets up to gain enough clearance to prevent it touching. Not all air cleaners will require this, but some do.
They're not all built the exact same, though. You want to make sure that the base doesn't come into contact with the accelerator pump arm on the top of a QJet (check in throttle-closed and throttle-full-open positions). It's not uncommon to have to stack a couple extra air cleaner gaskets up to gain enough clearance to prevent it touching. Not all air cleaners will require this, but some do.
#3
Junior Member
Thread Starter
Join Date: Apr 2014
Location: Southern Ohio
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28
Re: Air cleaner with a stock hood
Thanks Damon I haven't got my motor together yet but now i know what to look for. Funny thing is i sold a flat hood and then i got to thinking i could have cut it and put a small scoop in it if i needed more clearance.
#5
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (1)
Join Date: Aug 2007
Location: Bright, IN
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Bird, 96 ImpalaSS, 98 C1500XCab
Engine: LG4, LT1, L31
Transmission: 700R4, 4L60E, 4L60E
Axle/Gears: 3.73 Tors, 4.88 spool, 3.73 Eaton
Re: Air cleaner with a stock hood
I'm not sure if there is an internal height difference between the basic hood and the Formula hood, but my stock air cleaner assembly has a witness mark on the front edge of the lid where it just touches the Formula hood. Stock Q-jet with Performer manifold.
Thread
Thread Starter
Forum
Replies
Last Post
86IROC112
Engine/Drivetrain/Suspension Wanted
7
09-07-2015 01:37 PM