Carburetors Carb discussion and questions. Upgrading your Third Gen's carburetor, swapping TBI to carburetor, or TPI to carburetor? Need LG4 or H.O. info? Post it here.

carb adjustment

Thread Tools
 
Search this Thread
 
Old 12-05-2000, 10:16 AM
  #1  
Junior Member
Thread Starter
 
thadd47's Avatar
 
Join Date: Oct 2000
Location: villa ridge, mo, usa
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
carb adjustment

how often should one tune a carb? does it depend on temperature or brand? simple details on tuning?

thadd
Old 12-05-2000, 01:46 PM
  #2  
Member
 
chris83z28's Avatar
 
Join Date: Sep 2000
Location: Lubbock,Tx
Posts: 147
Likes: 0
Received 0 Likes on 0 Posts
All of the above, mixture, idle, jets, metering rods and more come into play. Usually a carb out of the box will be fairly close if you don't have a heavly modded motor. It is a little complicated but I learned how to tune my carb in about a week. It just takes practive and help from the wizzards on this board. You can ask specifics when you get into the tuning process. I can definatly help you with edelbrock carbs now.

------------------
1983 Camaro Z28
Goodwrench 350ci V8, Edelbrock TES Headers, Flowmaster Catback, MSD 6al and Blaster 2 coil, Edelbrock Performer intake, Edelbrock Performer 600cfm carb. T5, 373 rear, Eibach springs, Cervin Vega speakers, Rock. Fos. Sub, Pioneer CD,
email-chris4421@hotmail.com
-------------------------
"I used to be a Mustang Guy! I didn't know the power of the dark side!!"
Old 12-06-2000, 06:15 PM
  #3  
Junior Member
 
Camaros4_life's Avatar
 
Join Date: Nov 2000
Location: Ames, IA, US
Posts: 43
Likes: 0
Received 0 Likes on 0 Posts
I would suggest that unless you really know what you are doing to not mess with carb, they are realy touchy and will really mess up your cars performance if done wrong. Just some helpful advise so you don't have a car that runs like ****.
Old 12-07-2000, 11:24 AM
  #4  
Junior Member
Thread Starter
 
thadd47's Avatar
 
Join Date: Oct 2000
Location: villa ridge, mo, usa
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
i don't know much about carbs yet. what is a good beginners book? i don't like to rely on other people to work on my car when i can learn to do it myself.

thanks,

thadd
Old 12-07-2000, 11:50 AM
  #5  
Member
 
merf23's Avatar
 
Join Date: Dec 1999
Location: waterford, CT 06385
Posts: 311
Likes: 0
Received 0 Likes on 0 Posts
What kind of carb do you have? HP Books makes some decent books as well as Haynes.
You can get some great information on these boards...in fact i have seen very little if any bad advice given as if it was the Gospel.
I suggest you learn everything you can about the principles of operation and all the parts before you mess with it. Carbs are very responsive to changes so dont be afraid to try differnet things
Old 12-07-2000, 09:59 PM
  #6  
Member
 
84FTA's Avatar
 
Join Date: Jun 2000
Location: Youngstown, Ohio, USA
Posts: 388
Likes: 0
Received 0 Likes on 0 Posts
Tuning carbs via. a NEW 02 sensor (can't stress the word new enough) isn't all that complicated for Holleys. If you want detailed instructions on tuning a Holley I can help. I'm not much for Q-jets (a little more complicated than holley's because of two main varibles instead of just one).


Personally, I tune mine twice a year. I do one in average winter temp for around here then I do one in average summer temp. if I tuned it in the summer and tried to make it run on a really cold day it'd definetly be quite lean and vice versa would make it rich.

Like he said, most carbs out of the box are tuned well enough for daily driving but I like that little extra touch of performance and throttle response.

------------------
1984 WS6 Trans Am Hartop
Former L69 Car under restoration
1984 WS6 Trans Am T-top car
4-bolt main 350, headers, Holley 650, T-5 and 3.23's.
Daily driver and restoration
Old 12-08-2000, 10:18 AM
  #7  
Supreme Member
 
Ed Maher's Avatar
 
Join Date: Sep 1999
Location: Manassas VA
Posts: 3,197
Likes: 0
Received 6 Likes on 5 Posts
Car: 04 GTO
Engine: LS1
Transmission: M12 T56
And if you're talking about a stock CCCS you don't need to tune it at all, ever once you have it set right. At least not seasonally. You might want to recheck the TPS and idle dwell every now and then to verify things are OK, but thats it. At worst you turn a couple screws and are done in 5 minutes, barring some mechanical failure.
...ed
Old 12-12-2000, 05:32 PM
  #8  
Supreme Member

iTrader: (1)
 
Zepher's Avatar
 
Join Date: Feb 2000
Location: Norfolk, VA. USA
Posts: 7,964
Likes: 0
Received 3 Likes on 3 Posts
Car: 86 Trans Am, 88 Formula
Engine: 95LT4, 305TPI
Transmission: T56, T5
Originally posted by chris83z28:
All of the above, mixture, idle, jets, metering rods and more come into play. Usually a carb out of the box will be fairly close if you don't have a heavly modded motor. It is a little complicated but I learned how to tune my carb in about a week. It just takes practive and help from the wizzards on this board. You can ask specifics when you get into the tuning process. I can definatly help you with edelbrock carbs now.
I have an Edelbrock 1406 carb, and mine runs like crap. I can never adjust the screws on the front to make the car run good all of the time. Chris, if you have time, please email me some tips to adjust the carb correctly.
Thanks.
Manny Desantos
zepher@sybercom.net


------------------
Zepher
'86 Pontiac Trans Am WS6, LG4 305, 5 Speed, CF DF Clutch,
Edelbrock 1406 Carb, Edelbrock Performer RPM 7101 Intake Manifold.
Edelbrock Open Element Air Cleaner: Flowmaster Exhaust, 160* Thermostat,
Grant GT Steering Wheel, MSD HEI Coil, Taylor 8mm Wires, Recaro Seats,
Alpine CD+Changer,Rockford & Soundstream Amps, Premier TS-1040C Subs, Polk Audio highs/mids.
Best ET: 14.94@91.67
WS6 Trans Am
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GeneralIesrussi
Carburetors
5
01-20-2020 01:06 PM
J-money
Suspension and Chassis
15
01-04-2019 09:45 AM
makaveli09
Engine/Drivetrain/Suspension Parts for Sale
1
09-15-2015 10:43 AM
rjcme
Tech / General Engine
0
09-05-2015 01:23 PM
GeneralIesrussi
Tech / General Engine
0
09-03-2015 03:23 AM



Quick Reply: carb adjustment



All times are GMT -5. The time now is 02:14 PM.