engine temp wrong in TTS Datamaster?
#1
Supreme Member
Thread Starter
iTrader: (2)
Join Date: May 2009
Location: Delaware
Posts: 3,371
Likes: 0
Received 1 Like
on
1 Post
Car: 91' Firebird SOLD
Engine: 350 TPI +bolt-ons
Transmission: 700r4
Axle/Gears: 3:42
engine temp wrong in TTS Datamaster?
Have any of you guys experienced this in Datamaster? I know its winter,but i run a 180 thermostat and noticed in a few of my recent logs in TTS Datamaster that my engine temp never comes close to 180. It's like 173 at the most. Now my fan is set in my custom chip to come on at 195 and off at 190,but i have never seen the temp in Datamaster even come close. So, i am wondering if this program is reading accurately? I will check again and listen for my main fan to come on and let you all know. If someone experiences this same thing ,please let me know.
#2
Moderator
iTrader: (1)
Join Date: Mar 2002
Location: Chasing Electrons
Posts: 18,400
Likes: 0
Received 215 Likes
on
201 Posts
Car: check
Engine: check
Transmission: check
Re: engine temp wrong in TTS Datamaster?
Check the coolant sensor and connector. The connections/terminals tend to corrode a bit which causes a lower temperature reading.
Of course it could be that the thermostat is bad.
BTDT with both causes.
RBob.
Of course it could be that the thermostat is bad.
BTDT with both causes.
RBob.
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
01-09-2020 08:29 PM