Cold start injector ?'s
#1
Member
Thread Starter
Join Date: Feb 2001
Location: Cape Girardeau,MO
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85&95 Trans am
Engine: 85-LT1 95-LT1
Transmission: 4l60e & 4l60e
Axle/Gears: 3.23 & 3.23
Cold start injector ?'s
Can I delete this out of the prom? I've got an 85 tpi. It has a 305 in it right now, but I'm going to put a built 355 in it. I can get a 91 intake manifold that doesn't have a spot for a cold start. The reason for all of this is because I have a 88 l98 block&heads and I don't want to elongate the holes on my intake that I have now.
Thanks for any help.
Thanks for any help.
#2
Member
I recently changed to an accel intake manifold on my '87 vette and no longer am able to use the cold start. The cold start can just be blocked off on the fuel rail and forgotten about. We'll have to crank a little more n the morning, but its ok.
The '89 cars (for vettes at least, not sure on fbody) who did not have the CSV have a new algorithm in the ECM to do the same function with the other 8 injectors.
The '89 cars (for vettes at least, not sure on fbody) who did not have the CSV have a new algorithm in the ECM to do the same function with the other 8 injectors.
Thread
Thread Starter
Forum
Replies
Last Post
nhra-trans-am
Southern California Area
14
09-17-2015 10:16 PM