JoBy

And finally an new version again!

Ver 1.01a http://www.winaldl.webhop.net

* Spark table show actual knocks detected, not no of samples
when knock(S) was detected.
* Added highlight of active cell in tables
* If no of bytes is not correct in sample then only the raw
data table is update. This is to avoid garbage in other tables.
* Added 'heart beat' indication with no of bytes received. It
is allways visible at the top of the window. The background
flashes whenever a new sample is received. A short green flash
indicates good data. A short red flash indicates missing bytes
in data.
* Change O2 table data to three decimal values
* More flag data for 1227808


------------------
Jonas Bylund


[This message has been edited by JoBy (edited November 09, 2001).]

JoBy

Made a mistake, it will be out in a day ...

Sorry about that.



------------------
Jonas Bylund

JPrevost

lol, I got it before you look the link away
It starts up fine but I haven't tried to link it yet. What was the problem?

JPrevost

BTW, I finally got it to work. Problem was IRQ conflicts with the thinkpad. For some reason the inf. red port and modem took both IRQs (3 and 4) which left me with ZERO ports. IRQ 3 is usually Com 2 and 4 while IRA 4 is Com 1 and 3, lol, I had to spend 4 hours looking for a way to disable the darn IR and modem. Turns out I couldn't just disable them in the system, I had to download the "thinkpad features" utilities. Once I found them (an hour searching) it required me to do WAY more than I expected (floppy drive blah blah). Now I think I'm going to go oustide and try it for the first time. I'm sure it'll work.
Oh yeah, did anybody see the excel file that helps you tune BLMs with tunercat?
You just copy and paste the data from winaldl to excel, it converts the new numbers and then you just copy and paste it into your VE table in Tunercat. Looks pretty cool, hopefully this will speed things up.

burntblues

I didn't even get it to start up, I was gonna email and ask if it was compiled yet or something...

Haha, I was like, whoa, whats with all of these random files... "well, I'll click on them..." I swear to *** , my POS laptop was laughing at me...
I can't wait though...

Mike

JoBy

Ok, it is out there again now ...

Just delete all that and download again.
Hopefully it will work better this time.



------------------
Jonas Bylund

JoBy

And another thing ...

I made a lot of changes in the software, rewrote a lot of code.

If you see something strange then please let me now so I can fix it.

The CLCC definition is a bit different than the others an I suspect that it is one byte off. Could someone plese test that and see if the sensor data makes any sense? Check TPS and RPM and anything else that you can verify.

------------------
Jonas Bylund

JPrevost

It's telling me that the zip is bad. I can't open it with winzip. I can open the other versions, just tried, so something isn't working or it's just me.

JoBy

I can't see anything wrong with the zip. Does anybody else have problems?



------------------
Jonas Bylund

JPrevost

Got it to work, something fishy, I just kept downloading until it worked. For some reason I was only downloading 75kb, lol, gotta love microsoft.

Ragin'87

will the interface work with a DB15 to USB interface(like the one that comes with most joysticks these days? my laptop has no true serial port. two usb's and a firewire.) OR is it easier to just use the parallel port(is the software configured to use parallel?). Thanks.

Anthony

[This message has been edited by Ragin'87 (edited November 15, 2001).]

JoBy

It will not work with a USB to joystick interface.

The software only supports a serial RS232 port (DB-9 or DB-25). You can select which com port to use ( com1, com2, com3 or com4).

This USB to RS232 (DB-9) might work.
http://www.usbgear.com/usa/USB_rs232.html




------------------
Jonas Bylund



[This message has been edited by JoBy (edited November 15, 2001).]

Ragin'87

well.. damn. I'm going to have to try the USB to RS232 converter. Thanks for the info.

Anthony

JoBy

Yes, Ver 1.01b is the one to use now!

It has a bugfix. Found a problem with the highlight. INT / BLM / O2 would freeze if you switch from Spark tab with a high RPM or high MAP.

I also changed the TPS percentage scale.

------------------
Jonas Bylund