DIY PROM Do It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.

can't find DE table in $D8?

Thread Tools
 
Search this Thread
 
Old 06-16-2008, 04:35 PM
  #1  
???
Senior Member

Thread Starter
iTrader: (5)
 
???'s Avatar
 
Join Date: Aug 2006
Posts: 700
Received 18 Likes on 15 Posts
can't find DE table in $D8?

i'm using $d8 for the first time last night and could not find a table for de anywhere in the lists in tunerpro.


doing some searching today i can't seem to find a good answer. so i guess i'll just use up some bandwith and ask.


does it have one? and if so, whats it called? i have a big rich spike yeah you left of the gas and need to up the de some.

thanks.
Old 06-16-2008, 07:57 PM
  #2  
Supreme Member

iTrader: (30)
 
Jaysz28's Avatar
 
Join Date: Jul 2000
Location: Fort Myers, FL
Posts: 1,514
Received 17 Likes on 10 Posts
Car: 91 Firebird
Engine: 6.0
Transmission: T56
Axle/Gears: 3.73
Re: can't find DE table in $D8?

DE = Deceleration enrichment????

I'm guessing by your description.... but there is something in there along those lines

-jason
Old 06-16-2008, 08:05 PM
  #3  
???
Senior Member

Thread Starter
iTrader: (5)
 
???'s Avatar
 
Join Date: Aug 2006
Posts: 700
Received 18 Likes on 15 Posts
Re: can't find DE table in $D8?

Originally Posted by Jaysz28
DE = Deceleration enrichment????

I'm guessing by your description.... but there is something in there along those lines

-jason
yeah.. my bad. its just called de in code 59 I believe.
Old 06-16-2008, 09:50 PM
  #4  
Member

iTrader: (2)
 
Gary Anderson's Avatar
 
Join Date: Nov 2000
Location: Waukesha WI US
Posts: 168
Likes: 0
Received 1 Like on 1 Post
Re: can't find DE table in $D8?

There is both deceleration enleanment (DE) and deceleration fuel cut off (DFCO) in the 8D. I think they start at about address #85A6 if you can edit the binary. Otherwise you need an XDF like SAUJP V4 for Tunerpro. Should be available on Moates site.
Old 06-17-2008, 02:26 PM
  #5  
???
Senior Member

Thread Starter
iTrader: (5)
 
???'s Avatar
 
Join Date: Aug 2006
Posts: 700
Received 18 Likes on 15 Posts
Re: can't find DE table in $D8?

Originally Posted by Gary Anderson
There is both deceleration enleanment (DE) and deceleration fuel cut off (DFCO) in the 8D. I think they start at about address #85A6 if you can edit the binary. Otherwise you need an XDF like SAUJP V4 for Tunerpro. Should be available on Moates site.


ahhh so its just not in the xdf that im using... that makes sense.



but yeah, i'm a long way away from being able to use the adress number to change stuff. i'm hoping to get that deep someday thou. i'm only a few months into this diy prom tuning as of now.


as for the saujp v4. i have it saved on my computer but wanted to start out with cleaning up the stock bin first to get my feet wet, that and since its a stick car, i hope to be able to compair the iac stuff to the saujp since i believe its an auto bin. just for the drivablty stuff.

but can i use the xdf from the saujp to edit my stock bin? i was thinking they were linked.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
350 IROC-Z
Camaros Wanted
4
12-18-2015 03:58 PM
86CamaroDan
Engine/Drivetrain/Suspension Parts for Sale
2
09-29-2015 10:08 PM
383cam
Electronics
5
09-09-2015 06:01 AM
rjcme
Tech / General Engine
0
09-05-2015 01:23 PM
IROCZ1989
Transmissions and Drivetrain
2
09-04-2015 11:54 AM



Quick Reply: can't find DE table in $D8?



All times are GMT -5. The time now is 02:45 AM.