Win ALDL reading BLMs to work with 32B
09-23-2008, 09:33 PM
#1
Member
Thread Starter
Join Date: Apr 2004
Location: WASAGA BEACH
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 GTA Notchback
Engine: Edelbrock'd 5.7L TPI
Transmission: Stage 2 Trans go 700R4
Axle/Gears: 3.27 9 Bolt BW
Win ALDL reading BLMs to work with 32B
Question is, in WinALDL BLM tab, there are columns, 24 48 etc up to 216
Which corresponding LV8 columns in Tunerpro RT do these match up to for BPW Fuel vs Load table to get a proper fuel curve?
Example...
BLMs in WinALDL report 131 for RPM 1200 in Column 24
In Tunerpro RT, do I modify the 1200 rpm cell in the 16 Column or the 32 column or the 48 column in the BPW Fuel vs Load table?
I notice the 32B ALDL in Tunerpro RT lacks a lot of the information that the 6E ALDL does, namely the LV8 value and I can never get it to stay logging for too long, WinALDL runs and records beautifully.
Its funny, but I find tuning the 32B easier than the 6E for fueling...
Which corresponding LV8 columns in Tunerpro RT do these match up to for BPW Fuel vs Load table to get a proper fuel curve?
Example...
BLMs in WinALDL report 131 for RPM 1200 in Column 24
In Tunerpro RT, do I modify the 1200 rpm cell in the 16 Column or the 32 column or the 48 column in the BPW Fuel vs Load table?
I notice the 32B ALDL in Tunerpro RT lacks a lot of the information that the 6E ALDL does, namely the LV8 value and I can never get it to stay logging for too long, WinALDL runs and records beautifully.
Its funny, but I find tuning the 32B easier than the 6E for fueling...
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
40
08-21-2015 02:12 PM
