VE tables maxed out? Help
#1
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Canada
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Trans Am GTA
Engine: 383 HSR Profiler heads
Transmission: 700R4
VE tables maxed out? Help
Im tuning my 383 58mm TB
210cc profiler heads (10:1)
COMP XR276HR-12
30lb injectors
Currently im working on my VE tables and somthing weird is going on..
By 3600rpm and 80kpa im maxing out my VE tables (99.61%) and it seems to want more
Is this normal? Do i combat this with PE? Are my injectors to small?
Please help!
Thanks
Pat
210cc profiler heads (10:1)
COMP XR276HR-12
30lb injectors
Currently im working on my VE tables and somthing weird is going on..
By 3600rpm and 80kpa im maxing out my VE tables (99.61%) and it seems to want more
Is this normal? Do i combat this with PE? Are my injectors to small?
Please help!
Thanks
Pat
#2
Moderator
iTrader: (1)
Join Date: Mar 2002
Location: Chasing Electrons
Posts: 18,401
Likes: 0
Received 215 Likes
on
201 Posts
Car: check
Engine: check
Transmission: check
Re: VE tables maxed out? Help
If the injector duty cycle is under 86% then decrease the injector flow rate constant. If the DC is over 85% then either the fuel delivery is dropping off or the injectors are too small.
RBob.
RBob.
Thread
Thread Starter
Forum
Replies
Last Post