Electronics Need help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?

Oil Pressure gauge messed up

Thread Tools
 
Search this Thread
 
Old 08-01-2002, 03:22 PM
  #1  
Member

Thread Starter
iTrader: (1)
 
DuffMan's Avatar
 
Join Date: Jul 2001
Location: Temecula, CA
Posts: 202
Likes: 0
Received 1 Like on 1 Post
Car: '99 Cobra
Engine: 4.6 DOHC 32V
Transmission: T-45
Axle/Gears: 4.10
Oil Pressure gauge messed up

Well, my gauge is reading very high when i start the car (like near 60) and when i get above 2000 rpms, it jumps all the way to the right. somtimes it does it in relation to whether or not i floor it or not, but i dont know what the deal is. do these cars have oil sensors in the traditional sense, and if so, how hard is it to change out?

thanks a lot!
Old 08-02-2002, 12:37 AM
  #2  
Junior Member

 
ikilu2's Avatar
 
Join Date: Aug 2002
Location: Queens, N.Y.
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Definately sounds like the oil pressure sensor (oil switch). Most likely it's leaking giving you a sporatic reading. How easy it's changed depends on where it's located on your engine. Most 6 cyls it's located by the oil filter and you just screw it out when you change your oil. But for 8cyls it's located probably behind the distributor. It also screws out but it's reaching it where the problem comes in. If you have a 6cyl., no prob. 8cyl., well just take your time IF there is a clearance prob. Good news also is the part is cheap and can be found at any parts store.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
89GTAOz
Tech / General Engine
13
05-16-2020 09:31 AM
355sbcTPI
Electronics
2
08-19-2015 04:38 PM
bamaboy0323
Tech / General Engine
2
08-15-2015 07:20 AM
ChevyZ71
Interior
2
08-13-2015 07:30 AM



Quick Reply: Oil Pressure gauge messed up



All times are GMT -5. The time now is 08:10 PM.