no speedo or gas gauge
#1
Supreme Member
Thread Starter
Join Date: Dec 2003
Location: Kenosha Wi
Posts: 1,249
Likes: 0
Received 1 Like
on
1 Post
Car: 91 RS
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 10 bolt
no speedo or gas gauge
My car is a 91 RS and it has a ZZ4 crate swapped into it and no computer any more how can i get my speedo and gas gauge to work now? does anyone have a wiring diagram to help me out with the routing of all the wiring in these two circuits?
----------
----------
Last edited by BLACK ICE; 03-23-2006 at 12:17 AM. Reason: Automerged Doublepost
#2
Senior Member
Join Date: Oct 2003
Location: LaGrange (10min from Poughkeepsie), NY
Posts: 942
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS - not real slow anymore...
Engine: SPDC 360 MAF EFI /w a Holley Stealth Ram
Transmission: T5 untill it blows up from to much torque
Axle/Gears: Ford 9" /w auburn pro & 3.89's
#3
Supreme Member
Thread Starter
Join Date: Dec 2003
Location: Kenosha Wi
Posts: 1,249
Likes: 0
Received 1 Like
on
1 Post
Car: 91 RS
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 10 bolt
i dont see anything about the speedo or gas gauge in there and also i have no ecm so i need to know how to wire it the oldschool way
#4
Senior Member
Join Date: Oct 2003
Location: LaGrange (10min from Poughkeepsie), NY
Posts: 942
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS - not real slow anymore...
Engine: SPDC 360 MAF EFI /w a Holley Stealth Ram
Transmission: T5 untill it blows up from to much torque
Axle/Gears: Ford 9" /w auburn pro & 3.89's
I could be wrong, but I think the guage is wired in series with the fuel pump circuit.
#5
Supreme Member
Thread Starter
Join Date: Dec 2003
Location: Kenosha Wi
Posts: 1,249
Likes: 0
Received 1 Like
on
1 Post
Car: 91 RS
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 10 bolt
if it is in that diagram i dont know how to read it and all that stuff runs off the ecm in the middle that is an ecm diagram
#6
Senior Member
Join Date: Oct 2003
Location: LaGrange (10min from Poughkeepsie), NY
Posts: 942
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS - not real slow anymore...
Engine: SPDC 360 MAF EFI /w a Holley Stealth Ram
Transmission: T5 untill it blows up from to much torque
Axle/Gears: Ford 9" /w auburn pro & 3.89's
Nope, that is an engine electrical diagram. That's what your wires looked like before the zz4 deal. I'm gonna check my chiltons after i eat. I've seen the fuel level sender unit in there.
Last edited by Dirtbik3r; 03-23-2006 at 10:23 AM.
#7
Supreme Member
Thread Starter
Join Date: Dec 2003
Location: Kenosha Wi
Posts: 1,249
Likes: 0
Received 1 Like
on
1 Post
Car: 91 RS
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 10 bolt
by the way thats a hot car
----------
kinda reminds me of mine...
----------
kinda reminds me of mine...
Last edited by BLACK ICE; 03-23-2006 at 11:56 AM. Reason: Automerged Doublepost
Trending Topics
#8
Senior Member
Join Date: Oct 2003
Location: LaGrange (10min from Poughkeepsie), NY
Posts: 942
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS - not real slow anymore...
Engine: SPDC 360 MAF EFI /w a Holley Stealth Ram
Transmission: T5 untill it blows up from to much torque
Axle/Gears: Ford 9" /w auburn pro & 3.89's
Ok, i lied. I believe it's on its own circuit. Looking at the diagram, 2 wires lead to the tank for the fuel gage. One being pink, the other black. Both go through a connector named C313. From there, the black goes through ground distribution spot G304. The pink leads to the fuel gage in the instrument cluster. Coming out of the fuel gage, is a pink/black wire (C1 on instrument connector) which leads to the fuse block (10A fuse).
Hope this helps.
Hope this helps.
#9
Senior Member
Join Date: Oct 2003
Location: LaGrange (10min from Poughkeepsie), NY
Posts: 942
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS - not real slow anymore...
Engine: SPDC 360 MAF EFI /w a Holley Stealth Ram
Transmission: T5 untill it blows up from to much torque
Axle/Gears: Ford 9" /w auburn pro & 3.89's
Ok, i lied. I believe it's on its own circuit. Looking at the diagram, 2 wires lead to the tank for the fuel gage. One being pink, the other black. Both go through a connector named C313. From there, the black goes through ground distribution spot G304. The pink leads to the fuel gage in the instrument cluster. Coming out of the fuel gage, is a pink/black wire (C1 on instrument connector) which leads to the fuse block (10A fuse).
Hope this helps.
Hope this helps.
#10
Supreme Member
Thread Starter
Join Date: Dec 2003
Location: Kenosha Wi
Posts: 1,249
Likes: 0
Received 1 Like
on
1 Post
Car: 91 RS
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 10 bolt
yes it does thank you now i noticed that my speedo works when the headlights are off but not when they are on and the dash lights on the speedo and gas gauge dont work when the headlights are on but light up dim when they are off but the rest of the gauge lights work normal
----------
does this seem like a ground issue?
----------
does this seem like a ground issue?
Last edited by BLACK ICE; 03-23-2006 at 02:25 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
15
12-29-2023 08:23 AM