Starter for 153 tooth flywheel 2 piece rear
#1
Member
Thread Starter
Join Date: Jan 2005
Location: Queens NY
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Camaro Z28
Engine: 350 sbc goodwrench
Transmission: T-5 in the works
Axle/Gears: 10 bolt 3.42 open
Starter for 153 tooth flywheel 2 piece rear
Hey I am doing the T5 swap with a goodwrench block 2piece rear
The starter I got from autozone didnt work out it used the 1 long
1 short bolt to hold it to the block.
The starter bolts I found at the help secition where to long so I tried
to use about 3 washers then when that didnt work I put the washers on the block side of the starter to try and get it right.
I thought I could use any starter for 153 flywheel any ideas?
I am going to look for starters that have straight across bolt patterns
I guess.
The starter I got from autozone didnt work out it used the 1 long
1 short bolt to hold it to the block.
The starter bolts I found at the help secition where to long so I tried
to use about 3 washers then when that didnt work I put the washers on the block side of the starter to try and get it right.
I thought I could use any starter for 153 flywheel any ideas?
I am going to look for starters that have straight across bolt patterns
I guess.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
mhatfield 14
Tech / General Engine
5
10-24-2015 07:48 AM