clutch switch LS1/T56 swap question
#1
Member
Thread Starter
iTrader: (2)
Join Date: Nov 2006
Location: decatur, AL
Posts: 116
Likes: 0
Received 1 Like
on
1 Post
Car: 92 camaro rs
Engine: LS1, 426 rwhp 406 rwtq
Transmission: T56
Axle/Gears: 9" with 3.70's
clutch switch LS1/T56 swap question
i see the green and purple wires in the auto shifter connector. i also found the purple and green connector tied up by the fuse box. (car is a 1992 camaro rs auto). does this connector need to go to the clutch switch on the pedal? and can i leave the auto shifter connector alone if i use the connector by the fuse box? also, will my hatch release work? thanks guys.
#2
Supreme Member
iTrader: (7)
Join Date: Mar 2000
Location: Orange, CA
Posts: 5,674
Likes: 0
Received 106 Likes
on
65 Posts
Car: '90 Trans Am-12.45@110.71
Engine: 355 w/AFR 195's Elem. 400/430 HP/TQ
Transmission: Tremec T-56
Axle/Gears: 12 Bolt 3.73
Re: clutch switch LS1/T56 swap question
Yes it will work, but you need to switch the wires on the hatch plug located behind the radio and air duct. You will find a plug and another connector one marked auto and the other loose, just switch them.
Thread
Thread Starter
Forum
Replies
Last Post
rsrmoore
Transmissions and Drivetrain
1
08-07-2015 08:44 PM