Electronics Need help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?

dying on turns

Thread Tools
 
Search this Thread
 
Old 04-22-2010, 10:43 PM
  #1  
Member
Thread Starter
iTrader: (1)
 
rick121's Avatar
 
Join Date: Mar 2009
Location: Columbia SC
Posts: 104
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Camaro RS
Engine: 3.1 liter
Transmission: 700r4
Axle/Gears: positrac off an 83 T/A
dying on turns

car: 91 camaro 3.1 liter

Replaced fuel delivery system, had all elecrtical checked.

The problem is the car dies on slight turns while i'm pressing the brake. never sharp turns. no warning whatsoever, the car just shots off. after it happens voltage says 11 or 12, oil pressure says 0, everything else shuts down to zero. radio continues playing, and car rolls on w/o powersteering. what the heck causes this?
Old 04-23-2010, 09:42 AM
  #2  
Junior Member
 
FlamingPhoenix's Avatar
 
Join Date: Feb 2010
Location: Phoenix, AZ
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Car: '85 Trans Am WS6
Engine: L69 H.O. 305
Transmission: T5
Axle/Gears: 3.73
Re: dying on turns

Could be your power steering pump, or steeringbox, if they are dragging it will put a load on the motor and stall it mid turn, also could be worn steering parts creating drag, basicaly something in the steering is binding or dragging, and your power steering pump is having to work extra hard, at idle the motor can't compensate and stalls.
Old 04-23-2010, 10:59 AM
  #3  
Member
Thread Starter
iTrader: (1)
 
rick121's Avatar
 
Join Date: Mar 2009
Location: Columbia SC
Posts: 104
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Camaro RS
Engine: 3.1 liter
Transmission: 700r4
Axle/Gears: positrac off an 83 T/A
Re: dying on turns

just saw a third gen on waynes world that looks like mine before i wrecked. haha

Anyways, I hadn't really considered the power steering pump... hmmm sorta makes sense because sometimes in mid-turn the power steering seems to weaken up for a second and then work extra hard for the remainder of the turn...

can you think of any other symptoms to indicate a bad power steering pump or steering box? could be something that I don't notice until someone mentions it
Old 04-23-2010, 04:53 PM
  #4  
Supreme Member

 
camaronewbie's Avatar
 
Join Date: Sep 2002
Location: Cary, North Carolina
Posts: 9,192
Likes: 0
Received 16 Likes on 16 Posts
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
Re: dying on turns

Isn't there a sensor on the power steering box that senses turns and beefs up the rpms a tad to eliminate this? Might look to see about that sensor and it's wiring.
Old 04-23-2010, 07:49 PM
  #5  
Member
Thread Starter
iTrader: (1)
 
rick121's Avatar
 
Join Date: Mar 2009
Location: Columbia SC
Posts: 104
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Camaro RS
Engine: 3.1 liter
Transmission: 700r4
Axle/Gears: positrac off an 83 T/A
Re: dying on turns

if it is as simple as a sensor that'd be great. any idea what the heck its called?
Old 04-26-2010, 11:38 AM
  #6  
Supreme Member

 
NINÅ's Avatar
 
Join Date: Jan 2006
Location: Mooresville NC
Posts: 3,341
Likes: 0
Received 10 Likes on 10 Posts
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
RPM On The Bend

Scan for codes.

The Idle Air Control motor might not be functioning.


Happy Racing!



If People Drove Any Slower They’d Be Going Backwards
.
Old 04-26-2010, 08:05 PM
  #7  
Member
Thread Starter
iTrader: (1)
 
rick121's Avatar
 
Join Date: Mar 2009
Location: Columbia SC
Posts: 104
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Camaro RS
Engine: 3.1 liter
Transmission: 700r4
Axle/Gears: positrac off an 83 T/A
Re: RPM On The Bend

no codes which is not a suprise. seems like no one who has this problem (EVERYONE with a 90-92 v6) gets a code on this problem. IAC should be fine, though, brand new AC delco (as of last summer) and that and the throttle postion sensor were properly tuned. THis is why i hate EFI. stupid electrical problems.
Old 04-30-2010, 11:53 PM
  #8  
Member
Thread Starter
iTrader: (1)
 
rick121's Avatar
 
Join Date: Mar 2009
Location: Columbia SC
Posts: 104
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Camaro RS
Engine: 3.1 liter
Transmission: 700r4
Axle/Gears: positrac off an 83 T/A
Re: RPM On The Bend

ok this is really pissing me off. wasted 200 bucks and had ANOTHER shop refuse to have my car back. too old and not worth their time apparently. well idk if this is even an electrical problem so i should take it out of this forum. i did have a code 12 pop up today when the car died at the end of the street. couldnt find what it meant but this car is a piece. getting sick of 3rd gens in general. just old enough technology wise to be obsolete.
Old 05-01-2010, 12:19 AM
  #9  
Senior Member
 
KNBlazer's Avatar
 
Join Date: Feb 2010
Location: San Diego, California
Posts: 1,125
Likes: 0
Received 0 Likes on 0 Posts
Car: Trailblazer EXT 4.2 (Firebird Form)
Engine: 5.1 4bbl
Transmission: 700R4 Mega Raptor Level 4
Axle/Gears: 2.73
Re: RPM On The Bend

Originally Posted by rick121
ok this is really pissing me off. wasted 200 bucks and had ANOTHER shop refuse to have my car back. too old and not worth their time apparently. well idk if this is even an electrical problem so i should take it out of this forum. i did have a code 12 pop up today when the car died at the end of the street. couldnt find what it meant but this car is a piece. getting sick of 3rd gens in general. just old enough technology wise to be obsolete.

so you replaced the P/S pump? another thing you can do is top off your gas tank and then try to duplicate your problem... see if it happens...
Old 05-01-2010, 10:23 AM
  #10  
Member
Thread Starter
iTrader: (1)
 
rick121's Avatar
 
Join Date: Mar 2009
Location: Columbia SC
Posts: 104
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Camaro RS
Engine: 3.1 liter
Transmission: 700r4
Axle/Gears: positrac off an 83 T/A
Re: RPM On The Bend

interesting thing about this problem is that initially after putting in the new fuel injectors and all that it ran perfectly until i topped off the gas tank. then the problem started and now it seems here to stay. have not replaced the power steering pump mainly because the idea that was killing the engine got a lot of laughs at the shop i tried to put the car into. also i'm not throwing any more money down this hole until i get a bit more desperate
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
apo_bailon15
TBI
4
03-28-2016 05:20 AM
Andrew6.688
TPI
10
12-13-2015 10:59 AM
GTAman
TPI
26
09-21-2015 09:57 AM
EFR2000
Tech / General Engine
0
08-18-2015 08:54 PM
IroczFan
Carburetors
1
08-18-2015 05:19 AM



Quick Reply: dying on turns



All times are GMT -5. The time now is 03:32 PM.