help figuring out these wires...
#1
Member
Thread Starter
Join Date: Feb 2012
Location: Sandy, Or
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z
Engine: 5.7
Transmission: Auto
Axle/Gears: 3.23
help figuring out these wires...
Im having a code 34 problem on my iroc so tonight I decided to pull down the kick panel and make sure all the connectors and secured in the ecm just for piece of mind, and the first thing I see dangling there is this plug and these 3 cut wires. I dont think they are related to the code 34 maf problem but it would be nice to know what I got here...thanks!
#3
Member
Thread Starter
Join Date: Feb 2012
Location: Sandy, Or
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z
Engine: 5.7
Transmission: Auto
Axle/Gears: 3.23
Re: help figuring out these wires...
Theres also this one thats intresting.. it gets power just can't figure out where its supposed to go
#5
Junior Member
Join Date: Oct 2014
Location: USA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 iroc
Engine: 350 4-bolt main 010 bored .040 over
Transmission: t-5 manual
Re: help figuring out these wires...
it could also be the wire that you unplug to set your base timing for your distributor.
#6
Member
Thread Starter
Join Date: Feb 2012
Location: Sandy, Or
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z
Engine: 5.7
Transmission: Auto
Axle/Gears: 3.23
Re: help figuring out these wires...
That tan wire is still tucked by the fender, and the blower still works. Its puzzling cause ive looked everywhere and cant find for the life of me where it plugs into!
Trending Topics
#8
Member
Thread Starter
Join Date: Feb 2012
Location: Sandy, Or
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z
Engine: 5.7
Transmission: Auto
Axle/Gears: 3.23
Re: help figuring out these wires...
Ahh that makes since! In the second pic above the unplugged red wire there is another red wire with a connector that looks like its been fried...does anyone have an idea of what that goes too? Last question about the wiring thanks guys!
Thread
Thread Starter
Forum
Replies
Last Post
RedLeader289
Tech / General Engine
10
05-28-2019 01:47 PM