SLP Tri-Y Headers for 3rd Gen SBC
#1
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jul 2003
Location: Dallas, TX area
Posts: 3,205
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
SLP Tri-Y Headers for 3rd Gen SBC
SOLD, PAID FOR, AND SHIPPED!!!
I've got a set of used ceramic coated SLP Tri-Y headers I'm willing to sell. Comes with Y-pipe for dual cats set up, but can be easily modified to a single cat with a little welding. Y-pipes had to be cut off close to the cats, but that shouldn't hinder installing them, just use part of your existing exhause or stub in a couple of short pieces.
Have the AIR tubes still intact if you want to stay 50-state legal.
Now the bad part - I used some exhaust sealer around the tube to flange junction, thought they were leaking. Can be easily chipped off and welded if you prefer.
Headers are ceramic coated inside and out. Y-pipe is not. Y-pipe also has a couple of extra O2 sensor bungs already installed if you want to use them. If not, plugs are included to seal them off.
Asking $300 for these no longer made torque monster headers, plus shipping. PayPal preferred for payment (for both our protections)
Pics available on request, just require your e-mail address to send them to/
I've got a set of used ceramic coated SLP Tri-Y headers I'm willing to sell. Comes with Y-pipe for dual cats set up, but can be easily modified to a single cat with a little welding. Y-pipes had to be cut off close to the cats, but that shouldn't hinder installing them, just use part of your existing exhause or stub in a couple of short pieces.
Have the AIR tubes still intact if you want to stay 50-state legal.
Now the bad part - I used some exhaust sealer around the tube to flange junction, thought they were leaking. Can be easily chipped off and welded if you prefer.
Headers are ceramic coated inside and out. Y-pipe is not. Y-pipe also has a couple of extra O2 sensor bungs already installed if you want to use them. If not, plugs are included to seal them off.
Asking $300 for these no longer made torque monster headers, plus shipping. PayPal preferred for payment (for both our protections)
Pics available on request, just require your e-mail address to send them to/
Last edited by vernw; 03-21-2007 at 02:02 PM.
#3
Supreme Member
Join Date: Mar 2002
Location: Toronto
Posts: 3,054
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro Z28 Anniversary Edition
Engine: 305 TPI
Transmission: Borg Warner 5-Speed
Are they 1-5/8 or 1-3/4?
If they are 1-5/8 send me a picture to amedow@eis-inc.com and you can consider them sold!
If they are 1-5/8 send me a picture to amedow@eis-inc.com and you can consider them sold!
#4
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jul 2003
Location: Dallas, TX area
Posts: 3,205
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
These are 1-5/8 diameter headers.
Bluejae (Bryce) has first dibbs on them, easySPEEDcamaro is 2nd in line.
I'll get pics to both of you tonight, okay?
Bluejae (Bryce) has first dibbs on them, easySPEEDcamaro is 2nd in line.
I'll get pics to both of you tonight, okay?
#5
Member
Join Date: Jun 2005
Location: Topeka, Kansas
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Formula 350
Engine: L98 350 TPI
Transmission: 700-R4
Thank you and no problem with pictures comming tonight. I'll be at work, but I will look at them as soon as I get home which is around midnight. Thanks again.
#6
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jul 2003
Location: Dallas, TX area
Posts: 3,205
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
Re: SLP Tri-Y Headers for 3rd Gen SBC
I may have them sooner (over lunch hour if it's not pouring rain)...
#7
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jul 2003
Location: Dallas, TX area
Posts: 3,205
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
Re: SLP Tri-Y Headers for 3rd Gen SBC
Pics have been sent to all 3 interested folks.
Bluejae - the ball is in your court, and others are chomping at the bit. Please let me know as soon as possible whether you want these or not....
Bluejae - the ball is in your court, and others are chomping at the bit. Please let me know as soon as possible whether you want these or not....
Last edited by vernw; 03-20-2007 at 01:48 PM.
Trending Topics
#8
Junior Member
Join Date: Sep 2001
Location: louisville ,Ky
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Z
Engine: 5.0
Transmission: T-5
Axle/Gears: 10 bolt 3.42
Re: SLP Tri-Y Headers for 3rd Gen SBC
If the others pass, im really interested. Ive been looking for the dual cat versions for a while.
#9
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Jul 2003
Location: Dallas, TX area
Posts: 3,205
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
Re: SLP Tri-Y Headers for 3rd Gen SBC
Sorry, they've been paid for and shipped already. Thanks for the interest though!
Thread
Thread Starter
Forum
Replies
Last Post