350 parts, intakes, carbs, tpi setup, cranks, LS1 brakes
07-06-2008, 05:30 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Richmond,va
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86
Engine: 305 carbed
Transmission: auto
350 parts, intakes, carbs, tpi setup, cranks, LS1 brakes
Time to clean house!
Edelbrock performer 4bl "1406" 600cfm carb with electric choke, ran AOK when pulled $100
Carter (Edelbrock) performer "9635SA" 625cfm also ran fine when pulled $50 (perfect for a standard GM replacement 4brl carb)
Summit 4brl 226008 alum intake, NEW. $70
GM 300hp cam, NEW not installed. No specs but believed to be a nostalga 300hp cam. $70
GM takeout 1 peice rear 350 crankshaft, Basically brand new $100
Corvette (90s) TPI setup, no fuel rail or injectors. $75
Corvette (90s) aluminum center bolt valve covers, paint stripped waiting to be painted $40
LS1 (F-body) brakes, I have two sets, two sets of front calipers, brackets, sliders,bracket bolts, rotors, brake pads (all very new, just topical rust on the rotors from sitting) and two sets of rear brakes, Rotors, brackets, Parking brake shoes, calipers and all hardware in the same condition. Very nice upgrade
$95 for the front, $140 for the rear setup per set.
I MAY be able to discount items when you purchase more than one item.
EMAIL ME at lawabidn@yahoo.com I'm located in Richmond,Va
-Corey
Edelbrock performer 4bl "1406" 600cfm carb with electric choke, ran AOK when pulled $100
Carter (Edelbrock) performer "9635SA" 625cfm also ran fine when pulled $50 (perfect for a standard GM replacement 4brl carb)
Summit 4brl 226008 alum intake, NEW. $70
GM 300hp cam, NEW not installed. No specs but believed to be a nostalga 300hp cam. $70
GM takeout 1 peice rear 350 crankshaft, Basically brand new $100
Corvette (90s) TPI setup, no fuel rail or injectors. $75
Corvette (90s) aluminum center bolt valve covers, paint stripped waiting to be painted $40
LS1 (F-body) brakes, I have two sets, two sets of front calipers, brackets, sliders,bracket bolts, rotors, brake pads (all very new, just topical rust on the rotors from sitting) and two sets of rear brakes, Rotors, brackets, Parking brake shoes, calipers and all hardware in the same condition. Very nice upgrade
$95 for the front, $140 for the rear setup per set.
I MAY be able to discount items when you purchase more than one item.
EMAIL ME at lawabidn@yahoo.com I'm located in Richmond,Va
-Corey
Last edited by lawabidn; 07-07-2008 at 06:43 PM.
07-08-2008, 09:54 PM
#4
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Richmond,va
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86
Engine: 305 carbed
Transmission: auto
Re: 350 parts, intakes, carbs, tpi setup, cranks, LS1 brakes
Just noticed TPI setup has a dent in each runner, $30 for the whole set because of that
07-09-2008, 05:49 PM
#7
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Richmond,va
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86
Engine: 305 carbed
Transmission: auto
Re: 350 parts, intakes, carbs, tpi setup, cranks, LS1 brakes
Last edited by lawabidn; 07-09-2008 at 06:25 PM.
Trending Topics
07-12-2008, 07:09 PM
#8
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Richmond,va
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86
Engine: 305 carbed
Transmission: auto
Re: 350 parts, intakes, carbs, tpi setup, cranks, LS1 brakes
Only one set of front brakes left. both rear sets are gone now. Also have a Edelbrock 4brl intake now too.... $50 I wont have any new details on it until tomarrow
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
2
12-11-2023 08:14 AM
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
