Vortech hsr and etec 200's have to go.
12-16-2008, 11:19 PM
#1
Member
Thread Starter
iTrader: (2)
Join Date: Dec 2006
Location: Springfield MO
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z
Engine: 383 waiting on afr 195 comps
Transmission: T-56
Axle/Gears: 3.42 Posi
Vortech hsr and etec 200's have to go.
I have a vortech style hsr that has been ported for the etec heads( basicly the entire volume of the stock gasket)with fuel rail and adjustable reg for 400.00 obo shipped. paid over 550.00 will come with stock t.b. and injectors
I also have a set of edlebrock e-tec 200 heads with an honest 1200 miles on them for 900.00 obo plus exact shipping paid over 1100.00
Dont be affraid these wont be streetable, i have had no driveabilities issues with them, the low miles is because i started an obd2 conversion and it has taken all year. I only want to sell because i wont to go the miniram and 195 afr comp route this year to push the limits of my setup. Parts are still on the car but it wont take any time to remove it since its currently not running.
I also have a set of edlebrock e-tec 200 heads with an honest 1200 miles on them for 900.00 obo plus exact shipping paid over 1100.00
Dont be affraid these wont be streetable, i have had no driveabilities issues with them, the low miles is because i started an obd2 conversion and it has taken all year. I only want to sell because i wont to go the miniram and 195 afr comp route this year to push the limits of my setup. Parts are still on the car but it wont take any time to remove it since its currently not running.
12-17-2008, 04:40 PM
#4
Senior Member
Join Date: Apr 2002
Location: Milwaukee, Wisconsin
Posts: 537
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc Z28
Engine: 355 TPI
Transmission: T56
Re: Vortech hsr and etec 200's have to go.
Where are you located? I'm interested in the heads. Any more info on them? what springs? studs... whats all included?
12-17-2008, 06:39 PM
#5
Member
Thread Starter
iTrader: (2)
Join Date: Dec 2006
Location: Springfield MO
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z
Engine: 383 waiting on afr 195 comps
Transmission: T-56
Axle/Gears: 3.42 Posi
Re: Vortech hsr and etec 200's have to go.
Springfield MO, They have the original valve train, 3/8 rocker studs, guide plates if you don't run self-alligning rockers, spings good to .600 lift cant remember exact specs but I'll look it up and post it later. Hope this helps.
12-17-2008, 09:46 PM
#6
Senior Member
Join Date: Apr 2002
Location: Milwaukee, Wisconsin
Posts: 537
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc Z28
Engine: 355 TPI
Transmission: T56
Re: Vortech hsr and etec 200's have to go.
I'm very interested, any idea when you will be taking them off the engine? I would like to see some pics to see the condition.
Trending Topics
didn't get it 
Thread
Thread Starter
Forum
Replies
Last Post
[Sold] Flowmaster exhaust system
Night rider327
Engine/Drivetrain/Suspension Parts for Sale
4
10-09-2015 09:25 AM
TMZIrocZ350
Engine/Drivetrain/Suspension Parts for Sale
1
10-07-2015 12:09 PM
