Roller Lifters, Dogbones, Spider Hold Down, Bolts, Roller Cam
#1
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2005
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Roller Lifters, Dogbones, Spider Hold Down, Bolts, Roller Cam
These parts are from my old LT1 motor. I know that they are a good commodity to you third-gen TBI / TPI guys so I thought I'd highlight the fact that they are for sale.
The motor had about 53k on it when it was pulled and parted out.
The cam is from a Caprice - not a Camaro. But I'm sure you could find a CHEAP Camaro cam from one of the 4th-gen boards.
Let me know if interested. I would like to get $100 for all listed. I will break apart.
Buford, GA 30519
Hmmmm...I can't find a picture that I've got online of the lifters themselves, but they're just standard roller lifters. All of them spin freely.
Dogbones
Spider hold down
The motor had about 53k on it when it was pulled and parted out.
The cam is from a Caprice - not a Camaro. But I'm sure you could find a CHEAP Camaro cam from one of the 4th-gen boards.
Let me know if interested. I would like to get $100 for all listed. I will break apart.
Buford, GA 30519
Hmmmm...I can't find a picture that I've got online of the lifters themselves, but they're just standard roller lifters. All of them spin freely.
Dogbones
Spider hold down
Last edited by HectorM52; 01-09-2009 at 09:03 AM.
#2
Supreme Member
iTrader: (10)
Join Date: Oct 2007
Location: Fl.
Posts: 1,881
Likes: 0
Received 2 Likes
on
2 Posts
Car: 83 Trans Am / 96 Jeep XJ
Engine: 355 / 4.0 I6
Transmission: TH350 / Auto
Axle/Gears: 3.23 10-bolt / 4wd
Re: Roller Lifters, Dogbones, Spider Hold Down, Bolts, Roller Cam
Finally! Ive been wating for a post like this.
HIGHLY interested in the Spider / Dogbones / Lifters / Bolts, as long as these will fit into a Gen 1 roller motor, No need for the cam, I have one lined up. Please get me some more pics and a price.
Thanks.
Bradley23150@yahoo.com
HIGHLY interested in the Spider / Dogbones / Lifters / Bolts, as long as these will fit into a Gen 1 roller motor, No need for the cam, I have one lined up. Please get me some more pics and a price.
Thanks.
Bradley23150@yahoo.com
#3
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2005
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Re: Roller Lifters, Dogbones, Spider Hold Down, Bolts, Roller Cam
Finally! Ive been wating for a post like this.
HIGHLY interested in the Spider / Dogbones / Lifters / Bolts, as long as these will fit into a Gen 1 roller motor, No need for the cam, I have one lined up. Please get me some more pics and a price.
Thanks.
Bradley23150@yahoo.com
HIGHLY interested in the Spider / Dogbones / Lifters / Bolts, as long as these will fit into a Gen 1 roller motor, No need for the cam, I have one lined up. Please get me some more pics and a price.
Thanks.
Bradley23150@yahoo.com
I'll get some more pics in the morning.
#4
Supreme Member
iTrader: (10)
Join Date: Oct 2007
Location: Fl.
Posts: 1,881
Likes: 0
Received 2 Likes
on
2 Posts
Car: 83 Trans Am / 96 Jeep XJ
Engine: 355 / 4.0 I6
Transmission: TH350 / Auto
Axle/Gears: 3.23 10-bolt / 4wd
Re: Roller Lifters, Dogbones, Spider Hold Down, Bolts, Roller Cam
Got a guy getting me the dogbones and spider.
How much for the hardware and roller lifters? Mainly interested In pics of lifters.
Last edited by bradley23150; 01-09-2009 at 10:02 PM.
#5
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2005
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Re: Roller Lifters, Dogbones, Spider Hold Down, Bolts, Roller Cam
Finally! Ive been wating for a post like this.
HIGHLY interested in the Spider / Dogbones / Lifters / Bolts, as long as these will fit into a Gen 1 roller motor, No need for the cam, I have one lined up. Please get me some more pics and a price.
Thanks.
Bradley23150@yahoo.com
HIGHLY interested in the Spider / Dogbones / Lifters / Bolts, as long as these will fit into a Gen 1 roller motor, No need for the cam, I have one lined up. Please get me some more pics and a price.
Thanks.
Bradley23150@yahoo.com
----------
No, I want $25 for the cam. Notice I included shipping and a 3% paypal fee in the cost.
Last edited by HectorM52; 01-11-2009 at 10:10 AM. Reason: Automerged Doublepost
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
junkcltr
Tech / General Engine
6
08-02-2019 11:12 PM
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
09-02-2015 02:45 PM