WC T5 swap f/s
#1
Member
Thread Starter
iTrader: (12)
Join Date: Dec 2005
Location: NY
Posts: 383
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
WC T5 swap f/s
I have a world class T5 in my 88 iroc right now. I'm pulling the motor and putting it in the 91 I just got. I have a T56 and will use that on the 91 so I won't have a use for the T5 setup anymore. Trans and bell housing are from a 91 305 TPI firebird. I haven't even put 5k miles on the car since doing this swap everything is in great shape. I just want a 6spd instead on the new car. 700 obo The motor and trans are still in the car but will be out shortly I have pictures of the car as it sits now if your interested
- napa heavy duty clutch
- B&M short throw w/ firebird leather shift ****
- hydrolics were replaced when i did the swap (AC DELCO)
- trans was rebuilt (under the table cash job sorry no proof)
- I have both manual speedo bullet and vss
- gear reduction available separate
- I also have a spohn cross member and torque arm setup in the car. For the right price I would sell that too or I have a stock torque arm mount
Last edited by WIll36; 01-26-2009 at 07:29 PM. Reason: typo
#3
Member
Thread Starter
iTrader: (12)
Join Date: Dec 2005
Location: NY
Posts: 383
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: WC T5 swap f/s
any interest I'll even throw in 4 quarts of GM syncromesh fluid
#5
Junior Member
Join Date: Feb 2008
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 z28
Engine: L98 TPI
Transmission: Built 700R4
Axle/Gears: 3.23 posi
Re: WC T5 swap f/s
any hope of shipping (im in IL) ??
mebbe 750 shipped? theres one locally i can get for that but id rather get one from someone with some exper. in f bodies
mebbe 750 shipped? theres one locally i can get for that but id rather get one from someone with some exper. in f bodies
#6
Member
Thread Starter
iTrader: (12)
Join Date: Dec 2005
Location: NY
Posts: 383
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: WC T5 swap f/s
I would ship it but I highly doubt I would let all of that go for 750 shipped. Possibly everything but the spohn stuff. If your serrious pm me your zip code and I can look into in the next few days, but I gaurantee it will be expensive since the stuff has to go on a pallet. So figure 150 minimum in shipping alone.
Trending Topics
#8
Supreme Member
iTrader: (1)
Join Date: Apr 2005
Location: Valdosta, GA
Posts: 1,165
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Trans Am GTA
Engine: L98(5.7 L TPI)
Transmission: 700r4(A4)
Axle/Gears: G80 RPO, 3:23s, Auburn Racer's Diff
Re: WC T5 swap f/s
do you have the pedals, slave cyl, etc? I need everything to swap into an automatic 5.7.
Thanks
Bill
Thanks
Bill
#9
Member
Thread Starter
iTrader: (12)
Join Date: Dec 2005
Location: NY
Posts: 383
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: WC T5 swap f/s
I have everything you could want/need. I did the T5 swap on my 350 auto car about 2 years ago and I got a really good deal on a 6 speed a little while ago so all the 5 speed stuff is available. Including a spohn torque arm with front driveshaft loop and rod end.
#11
Member
Thread Starter
iTrader: (12)
Join Date: Dec 2005
Location: NY
Posts: 383
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: WC T5 swap f/s
Don't remember off the top of my head but with the gear in the trans and the reducer the speedo is dead accurate with 3.42s and stock height tires.
#12
Junior Member
iTrader: (10)
Join Date: Jan 2008
Location: Yorkville,IL
Posts: 60
Likes: 0
Received 1 Like
on
1 Post
Car: 71 Challenger, 70 duster, 89 iroc,
Engine: hemi and 440
Transmission: a-833 4 speed
Re: WC T5 swap f/s
would you be willing to sell the shifter ball, clutch inspection cover, and the clutch fork dust boot off the trans, separate?
#13
Member
Thread Starter
iTrader: (12)
Join Date: Dec 2005
Location: NY
Posts: 383
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: WC T5 swap f/s
No I'm not interested in breaking up the swap. My boss has a T5 sitting in the corner of his garage at home I can ask him if he wants to sell any of the parts off it.
#14
Junior Member
Join Date: Nov 2008
Location: ny
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Firebird
Engine: i have many.
Transmission: WC T-5 from a 1987 GMC 1500
Axle/Gears: 4th gen 10 bolt - 3.23
Re: WC T5 swap f/s
would you consider just selling the spohn crossmember, Im in NY let me know.
#15
Member
Thread Starter
iTrader: (12)
Join Date: Dec 2005
Location: NY
Posts: 383
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: WC T5 swap f/s
#19
Member
Thread Starter
iTrader: (12)
Join Date: Dec 2005
Location: NY
Posts: 383
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: WC T5 swap f/s
No the trans is still in the car. It'll be a couple of days before I could put it up on a lift and take pictures. Either way as of now I will only sell the complete swap and even with what you and challenger want that would still leave me with too many extra parts.
#20
Re: WC T5 swap f/s
Where in NY are you ? I'm interested in the transmission, I dont need any of the other stuff you have, I dont even really need the bell. let me know if you decide to seperate
#21
Member
Thread Starter
iTrader: (12)
Join Date: Dec 2005
Location: NY
Posts: 383
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: WC T5 swap f/s
Not to sound like a broken record here but I will not break this swap up. I'm looking to sell these parts to pay for the rest of the pieces I need for my 6 speed conversion. 2 members have expressed serrious interest in the full swap so please don't waste my time or yours by asking me to sell just the transmission or other parts separate. I will only sell this as a full swap.
#22
Re: WC T5 swap f/s
any chance you still got it ?? and where in NY are you located i live in warwick about an hour from the city. Very interested nd cash in hand i was wondering if you would want to sell the hole set up stock crossmember trans, and the pedal setup with the slave cylinder nd what not. I have a 91 gta im looking to do a 5 speed swap on so let me know. Thanks alot man if its easier for you, you can call or text me too. my numbers 845 787 7075.
Thread
Thread Starter
Forum
Replies
Last Post