You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Guys I am parting out my engine. Need the money for expenses
Used Holley stealthram intake - 225.00 SOLD
w/ 24 lbs Accel injectors - 300.00 SOLD
set of 30 lbs Accel injectors - 150.00 SOLD
AFR 190cc (2.02in - 1.60ex) heads SBC part number: (190SHST)- 950.00 AFR email: You have our old 190cc SBC casting which was discontinued around 04. What the markings mean:
190 is the intake runner volume S is small combustion chamber H is heat riser (emissions) ST is straight plug
Used SLP SBC/TPI headers -300.00 SOLD
w/ y-pipe - 400.00 SOLD
Used SBC 350 shortblock (w/ forged interenals) 2000miles on block - 500.00 (w/ starter add 65.00).
Stock TPI intake system - 220.00 ( includes runners, plenum, base manifold, fuel rail w/ adjustable fuel pressure reg.) add 55.00 for throttle body with airfoil.
Venom control box module. - 195.00
Used cat 3 inch in and out with AIR hook up ( in decent shape) - 35.00
Last edited by VenomCamaro; 07-16-2009 at 10:11 AM.
Reason: updating
__________________ 91 Z28, L98, GMPP heads, Edlebrock Base and Runners, edelbrock headers, UMI LCA's, Panhead bar. 91 Z28 & 86 Iroc Z - Soon to be picked up.
Well i am all set on injectors so i would need the intake and plenum with attaching hardware, the fuel rails, and the lines to attach the fuel rails to the body fuel lines..... and just to be sure this is for NON vortec heads right??? also is this for centerbolt valve cover style heads or perimeter??? Will most likely buy it from you just waiting for the response.
Thanks Bill for the response to answer your questions:
Yes its comes with all the hardware to mount it to the engine and yes its for non vortec heads with perimeter bolts. Im sure it will fill the centerbolt heads as well because i had the stock tpi intake mounted on theses heads before i swaped it for the stealthram and the old heads were center bolt.
consider the stealth ram sold.... just let me know where to send the money.... and will it come with the fuel lines to attach from the fuel rails to the hard lines on the body???
Venom, I have cash and a short attention span. Please respond to the latest PM. I really want to see the pip0e that goes from the drivers side header to the Y pipe.
874ME It took me a couple of day's to get my pictures, plus he may be gone for a long Memorial Day weekend. Please remember our service men & women who died so that we may have the Freedoms we sometimes take for granted.
I have been waiting patiently also. Would like to hear from Venom soon, I was set to install a brand new set of edelbrock headers and Y pipe on my wifes car a week ago and have been holding off. The parts are sitting on the bench, and I have a possible buyer for the EB set up waiting in the wings.
I'll agree, especially since he was initally concerned about the lack of replies to his post. I hope nothings happened & he's OK. Does anybody here know him or have a phone number?
Sorry guys for the delay had a family emergency and the long memerial day weekend slowed the shipping process. Thanks for your patience. I will answer all questions and get the pics out to people who need them.
Venom, please either post here or email me a pic of the complete Y pipe. dlpjr1@verizon.net
If it is includes the portion that attaches to the drivers side header consider the headers and Y pipe sold.
Yes 874me the y-pipe includes the driver side portion too that goes under the oil pan. they both come together just as they enter the cat. I will have a pic for you tonight, thanks for the patience.
I knew thirdgen guys were the best car enthusiasts.
could you send some more pics of the shortblock and heads to barbienles@msn.com. thanks , and what would it be to have this combo shipped to Ettrick Wi 54627. thanks Les
I bought them a few years back but I had the rebuilt 1 1/2 ago and only had about 2000 miles on them, no porting done to them other then what AFR does to them. 65 cc combustion chambers. duel valve springs.
__________________ 91 Z28, L98, GMPP heads, Edlebrock Base and Runners, edelbrock headers, UMI LCA's, Panhead bar. 91 Z28 & 86 Iroc Z - Soon to be picked up.
I bought them a few years back but I had the rebuilt 1 1/2 ago and only had about 2000 miles on them, no porting done to them other then what AFR does to them. 65 cc combustion chambers. duel valve springs.
I am interested in your AFRs. A part number would help so that I can look them up.
Basic questions are
- do they support centerbolt heads
- are they straight or angle plug
- are they 180s? 190s?
- do they have EGR ports (emissions are mandatory here)
- any known problems, cracks, dings, etc?
