87_355ci_Camaro

iTrader: (2)

I have a complete TPI setup from my 86 Iroc, I no longer need it cause I went Carb.
Harness is cut, Fan, Lockup, and one relay plug was cut out and a new one spliced in. I have the relays to go with it and two new ones, comes with the Dizzy and a new Mod chip, No cap. I most of all the bolts to go along with everthing, Maf is bad I think? Injectors, fuel rail, plenum, runners, knock sensors, lower intake and 9th injector are what I have boxed up in a summit box ready to go. I also wanna keep everything together.
Im looking for atleast 250 plus shipping, have pics also.

Stock TQ converter with 25K, 100 plus shipping or OBO

Stock 416 heads that I started to clean up, the exhaust ports and one of the intake ports I started on. Heads have 57k and are bare but I can include newer springs, lifters and push rods. 150 plus shipping

Rebuilt 193 heads bare, perfect for a truck, 10mi on them, I have the valves and rockers for them also, 100 plus shipping

Rebuilt quadrajet carb with no miles on it, needs to be cleaned up a bit. 20 bucks plus shipping.

I need this stuff gone, Its taking up waay to much space.
Thanks for looking.

87_355ci_Camaro

iTrader: (2)

No offers??? Forgot to mention everything is neg.

Anyone have a vacc controlled HEI?

robertg

iTrader: (2)

your qjet carb...... is it electronic or non electronic?

if it's electronic, i do have a vacuum controlled hei.... where in pa are you?

87_355ci_Camaro

iTrader: (2)

Yes its electronic, its alittle dirty from sitten in a shed.butterflys should be taken off and given a good cleaning.
I started to dial it in on the motor it was on but never got past idle with it at the time.

I'm in the stroudsburg area.

robertg

iTrader: (2)

hmmmm......

i'm interested in the carb. would you be interested in trading for this distributor that i have?

87_355ci_Camaro

iTrader: (2)

Sure, sounds fair. Is it a stock gm piece? I don't need the cap and rotor for it.
Want pics of the carb? I can get them tomarrow afternoon to you're email, just pm me with it.

robertg

iTrader: (2)

yes, it's a stock gm distributor, but has been upgraded with a hypertech cap, rotor, and high voltage coil.

i'll get you a couple photos of this distirbutor in exchange for pictures of the carburetor.

thanks!

87_355ci_Camaro

iTrader: (2)

Any offers one the other stuff? I need it gone.