stage20

iTrader: (3)

1 7/8 stainless "turbo style" headers.
they have been MIG welded.
built from a kooks or a stainless works kit, i cant remember.
this was a 1st attempt at building a header. not saying its the best, but worked great in a deadly consistant s10. truck has been 6.0 1/8 mile on motor with these headers on a 408, and ran 6.70's with a head and cam 346 at 2900#.
headers were built short and run out the front due to frame clearance.
could be converted easily to forward facing up or downswept turbo headers.
one header is fully welded, ready to bolt on.
the other header has 2 slip on tubes used for getting around the steering components.
a piece of tubing was cut, so that primary tube will need a small piece of strait tubing welded in to make this header fit into the collector. pic below.
collectors have the "spears" in them.
some tubes have small dents and dings in them. these are by no means show quality or proffesionally built, but they work!
250 shippped OBO!

stage20

iTrader: (3)

had a few hits on them. people want them for free so i guess im ready to give them away.
taking up space. need them out of the way.
make offer. seriously.

stage20

iTrader: (3)

what you see is what you get in the pics.
these arent a masterpiece.
could use them for mock up, or for the flanges, pieces, parts, whatever.
they are stainless.

100.00 shipped.
i accept paypal.