complete tpi setup + 65# injectors + complete harness and megasquirt 2 v3.0 ems
#1
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Utah
Posts: 10,401
Likes: 0
Received 2 Likes
on
2 Posts
Car: 89 RS 89 iroc 87 firebird
Engine: 3.1 Turbo/ 355 twin turbo
Transmission: a4 w/ 4500 stall/ a4 / t5
Axle/Gears: strange s60 /w 3:42's
complete tpi setup + 65# injectors + complete harness and megasquirt 2 v3.0 ems
looking to trade my fuel injection setup for a complete blow threw carb setup
carb
intake and carb hat
tpi base has been modified to fit both perimiter style and center bolt heads
u get complete tpi setup
brand new
precision 65# low-z injectors
megasquirt 2 loaded with ms 2 extra 3.2.1 code which is the latest
wiring harness to wire up the megasquirt ( no cutting or splicing needed , just mount the ms in place of stock ecm run the harness out to the motor plug in sensors hook up 2 gounds and one keyed power to the ecm
edit
pictures added see below
carb
intake and carb hat
tpi base has been modified to fit both perimiter style and center bolt heads
u get complete tpi setup
brand new
precision 65# low-z injectors
megasquirt 2 loaded with ms 2 extra 3.2.1 code which is the latest
wiring harness to wire up the megasquirt ( no cutting or splicing needed , just mount the ms in place of stock ecm run the harness out to the motor plug in sensors hook up 2 gounds and one keyed power to the ecm
edit
pictures added see below
Last edited by project89; 05-17-2012 at 09:56 PM.
#2
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Utah
Posts: 10,401
Likes: 0
Received 2 Likes
on
2 Posts
Car: 89 RS 89 iroc 87 firebird
Engine: 3.1 Turbo/ 355 twin turbo
Transmission: a4 w/ 4500 stall/ a4 / t5
Axle/Gears: strange s60 /w 3:42's
Re: complete tpi setup + 65# injectors + complete harness and megasquirt 2 v3.0 ems
will also sell outright for the right price
megasquirt 2 v 3.0 costs 437$ new
unterminated harness is 80$ new
avg price of complete tpi is about 300 bucks
precision turbo 65# injectors 505$ brand new
so the whole package would cost 1322.00
will sell whole package for 800.00
may split up if i can find buyers for everything
megasquirt 2 v 3.0 costs 437$ new
unterminated harness is 80$ new
avg price of complete tpi is about 300 bucks
precision turbo 65# injectors 505$ brand new
so the whole package would cost 1322.00
will sell whole package for 800.00
may split up if i can find buyers for everything
#3
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Utah
Posts: 10,401
Likes: 0
Received 2 Likes
on
2 Posts
Car: 89 RS 89 iroc 87 firebird
Engine: 3.1 Turbo/ 355 twin turbo
Transmission: a4 w/ 4500 stall/ a4 / t5
Axle/Gears: strange s60 /w 3:42's
Re: complete tpi setup + 65# injectors + complete harness and megasquirt 2 v3.0 ems
pictures
tpi
and for thos eof u that dont know what a megasquirt ecm looks like
tpi
and for thos eof u that dont know what a megasquirt ecm looks like
#4
Want a title? Post!
Join Date: Dec 2006
Location: Bowling Green, OH
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 97 GMC Sonoma
Engine: 383
Transmission: T56
Axle/Gears: GM 8.5 with 4.10s
Re: complete tpi setup + 65# injectors + complete harness and megasquirt 2 v3.0 ems
might be interested in the megasquirt and maybe the harness...(going in a Sonoma, so depending on what was done to the harness)
#5
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Utah
Posts: 10,401
Likes: 0
Received 2 Likes
on
2 Posts
Car: 89 RS 89 iroc 87 firebird
Engine: 3.1 Turbo/ 355 twin turbo
Transmission: a4 w/ 4500 stall/ a4 / t5
Axle/Gears: strange s60 /w 3:42's
Re: complete tpi setup + 65# injectors + complete harness and megasquirt 2 v3.0 ems
the megasquirt harness will connect the ecm to the engine
it has all the wiring for the injectors,distributor, coolant temp air temp tps and aic, it also has a fuel pump relay wire for turning on the fuel pump but i have that wire seperate out of the harness since my fuelpump is wired to a toggle switch along with my main power wire. but i can put the fuel pump wire back into the harness for u if u like
if u go this route u would need to wire up ur fans seperatly since i dont have the ecm setup to control the fans, but its very easy to do using the stock fan switch
i can also setup the ecm to control the fans on the fidle wire for u as well
it has all the wiring for the injectors,distributor, coolant temp air temp tps and aic, it also has a fuel pump relay wire for turning on the fuel pump but i have that wire seperate out of the harness since my fuelpump is wired to a toggle switch along with my main power wire. but i can put the fuel pump wire back into the harness for u if u like
if u go this route u would need to wire up ur fans seperatly since i dont have the ecm setup to control the fans, but its very easy to do using the stock fan switch
i can also setup the ecm to control the fans on the fidle wire for u as well
#6
Junior Member
Join Date: Mar 2012
Location: Quad Cities, IA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Camaro IROC-Z 5.7 TPI
Engine: 350 aka 5.7L Tuned Port Injection
Transmission: 700-R4
Axle/Gears: 3.27 posi
Re: complete tpi setup + 65# injectors + complete harness and megasquirt 2 v3.0 ems
How much for the megasquirt and harness?
Last edited by twest2k2; 05-23-2012 at 10:55 PM. Reason: found answer to first question
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM