SBC aluminum Vette heads
#1
SBC aluminum Vette heads
I have a pair of 1987 Chevy Corvette aluminum heads with only 64K miles on them. Nothing wrong with them, I'm replacing them and don't need to keep them around.
These are the "128" heads with the standard port shapes and sizes so no special intakes or headers are required.
$250 OBO, plus shipping
These are the "128" heads with the standard port shapes and sizes so no special intakes or headers are required.
$250 OBO, plus shipping
Last edited by mcm95403; 11-12-2012 at 10:47 AM.
#4
Re: SBC aluminum Vette heads
Yes, but I'm not sure which bolt angle you would have for the four center bolts on your intake.
Also, remember that these don't have a heat crossover so your EGR wouldn't work unless you have a tube comming off the exhaust up to the intake.
Sorry, but I'm not sure about the differences between the Vette and F-body TPI parts. I am also selling the complete matching TPI setup as well in case you need it.
Also, remember that these don't have a heat crossover so your EGR wouldn't work unless you have a tube comming off the exhaust up to the intake.
Sorry, but I'm not sure about the differences between the Vette and F-body TPI parts. I am also selling the complete matching TPI setup as well in case you need it.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM