master kit 700r4 with must have upgrades for big power
#1
Member
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: Jax/FL
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 formula, sd,730ecm with $59
Engine: 383/ t-76 turbonetics
Transmission: 700r4 3200 vig converter
Axle/Gears: 3.42
master kit 700r4 with must have upgrades for big power
I have assembled my last kit out of parts I had this is a set up for all the 700 can take short spending big bucks on hardened drums and shafts.
New 10 vane pump kit
3 new accumulator pistons (these wear causing sloppy shifts)
new heavy duty hardened steel high energy band
new low sprag borg warner heavy duty 4l65e extra wide
new heavy duty front sprag 28 element borg warner (the best)
late model 3-4 clutch stack with high energy clutchs and black kolene steels
the real beast sun shell by sonnex not the chinese one floating around
Complete 3-4 drum setup with molded pistons and all the parts u need to convert it from the 700
.500 boost valve
no stick throttle valve kit with jr shift improver
corvette servo or can be billet servo for 75 bucks more added to kit.
complete paper and rubber kit
all the clutches from late model 4l60e better linings
complete bushing kit front to back
special d-ring kit for corvette servo for more band holding power
new ball and capsule that goes in the case to prevent burned 3-4 clutches.
If you were to price this all out separate it would be over 500 bucks that is if you can get some of the stuff like the 3-4 drum stuff most make you buy the whole drum for 150 bucks.
310 shipped with corvette servo and 385 shipped with billet servo. They run 75 to 100 bucks for the billet servo alone. I can also help walk you through any of my trick stuff I do for better shifting and to live longer. I can also give tips on how to size the seals on the input drum if you dont have the tool. lt1z350@bellsouth.net is the quicker way to get me as this wont last long I sold the other two kits in a few days due to such a great deal.
New 10 vane pump kit
3 new accumulator pistons (these wear causing sloppy shifts)
new heavy duty hardened steel high energy band
new low sprag borg warner heavy duty 4l65e extra wide
new heavy duty front sprag 28 element borg warner (the best)
late model 3-4 clutch stack with high energy clutchs and black kolene steels
the real beast sun shell by sonnex not the chinese one floating around
Complete 3-4 drum setup with molded pistons and all the parts u need to convert it from the 700
.500 boost valve
no stick throttle valve kit with jr shift improver
corvette servo or can be billet servo for 75 bucks more added to kit.
complete paper and rubber kit
all the clutches from late model 4l60e better linings
complete bushing kit front to back
special d-ring kit for corvette servo for more band holding power
new ball and capsule that goes in the case to prevent burned 3-4 clutches.
If you were to price this all out separate it would be over 500 bucks that is if you can get some of the stuff like the 3-4 drum stuff most make you buy the whole drum for 150 bucks.
310 shipped with corvette servo and 385 shipped with billet servo. They run 75 to 100 bucks for the billet servo alone. I can also help walk you through any of my trick stuff I do for better shifting and to live longer. I can also give tips on how to size the seals on the input drum if you dont have the tool. lt1z350@bellsouth.net is the quicker way to get me as this wont last long I sold the other two kits in a few days due to such a great deal.
Last edited by lt1z350; 07-24-2013 at 08:27 PM.
#2
Member
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: Jax/FL
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 formula, sd,730ecm with $59
Engine: 383/ t-76 turbonetics
Transmission: 700r4 3200 vig converter
Axle/Gears: 3.42
Re: master kit 700r4 with must have upgrades for big power
flexable on price if not in need of some of the stuff I will work with u
#3
Member
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: Jax/FL
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 formula, sd,730ecm with $59
Engine: 383/ t-76 turbonetics
Transmission: 700r4 3200 vig converter
Axle/Gears: 3.42
Re: master kit 700r4 with must have upgrades for big power
still got this stuff and surprised no takers so far last two sets sold quick and this is the best I have offered
#6
Member
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: Jax/FL
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 formula, sd,730ecm with $59
Engine: 383/ t-76 turbonetics
Transmission: 700r4 3200 vig converter
Axle/Gears: 3.42
Re: master kit 700r4 with must have upgrades for big power
Send me an email to send pics to.
Trending Topics
#8
Member
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: Jax/FL
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 formula, sd,730ecm with $59
Engine: 383/ t-76 turbonetics
Transmission: 700r4 3200 vig converter
Axle/Gears: 3.42
Re: master kit 700r4 with must have upgrades for big power
Bump
#10
Member
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: Jax/FL
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 formula, sd,730ecm with $59
Engine: 383/ t-76 turbonetics
Transmission: 700r4 3200 vig converter
Axle/Gears: 3.42
Re: master kit 700r4 with must have upgrades for big power
Ttt
#11
Member
Thread Starter
iTrader: (2)
Join Date: Mar 2006
Location: Jax/FL
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 formula, sd,730ecm with $59
Engine: 383/ t-76 turbonetics
Transmission: 700r4 3200 vig converter
Axle/Gears: 3.42
Re: master kit 700r4 with must have upgrades for big power
Come on guys need this gone great deal lots of great upgrades and stout combo. Tell your friends I have seen many posts on people trying to make a strong trans and it is all right here.
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
2
12-11-2023 08:14 AM