Reddeath210

iTrader: (1)

Pro Comp aluminum heads, Pull off a 383 stroker motor. Heads could use a rebuild, and a bit of cleaning. Heads are PC3003, from what i gather they are 210CC heads. looking for 300 bucks. Open to offers

chiz420

iTrader: (5)

Got some pics of the combustion chamber side. Also why the removal of only a few valves n guides n such???

absaraka

How are the seats? Any pics of the combustion chamber side?

Reddeath210

iTrader: (1)

To remove them from the engine, some of the valves had to be taken off, because of bolt placement

Reddeath210

iTrader: (1)

Pictures as requested. Like I said heads good probably use a good cleaning. Need 2 sell though so make some offers.

rarebmx

iTrader: (6)

Angle or Straight plugs? 7/16th or 3/8th? Kicking these around. Wish they were small than 64cc but way better than stock.

Reddeath210

iTrader: (1)

Straight i think. I'll check 2morrow. Size wise I dont know these heads came on my first block so I am not to familar with them

88Z350

iTrader: (3)

how hard is it to flip the head over and take a few pics of the combustion chamber not the intake ports , you should not have had to taken anything apart to remove the head . were the valves bent , are the combustion chambers chewed up

-=Z28=-

iTrader: (3)

I agree?? Why wasnt there pics from the beginning of the combustion chamber?? Ive never had to remove valve springs to get head bolts out.... and man, that gasket placement/intake man sure was restricting that motor. Holly cow!!! number 1 or 8 cyd valves, the faces are toast!! something bad happened to those heads....... although for 300...... not bad... feel like seller is hiding something..

Reddeath210

iTrader: (1)

Not hiding anything just don't know alot tbh.

Reddeath210

iTrader: (1)

I apologize for misreading my bad, the heads where on a motor b4 and had no issues. The reason the engine came out of the car was because my uncle over tightened a rocker and bend the push rod. When the engine was taken out of the car I took the heads of just to get some hands on experience since this was my first go around. The reason I am trying to sell them so cheap is because I know they will probably need a rebuild, and my trans just died in my 85. If your interested I would be glad to answer any questions about the heads. My cell # is 2679390124 prefer a text.

rarebmx

iTrader: (6)

I am not sure the price is so "cheap". I do think you will sell them but possibly look up these heads brand new. There are options too with these heads so without running the numbers who knows....
http://www.competitionracingsupply.com/item--SBC-ProComp-Aluminum-Cylinder-Heads-210-Runner-Assembled---Item--PCM-3003C--sbc_aluminum_cylinder_heads.html

Reddeath210

iTrader: (1)

I am open to offers

-=Z28=-

iTrader: (3)

They are angle plug fyi... Good luck with the sale man. didnt mean to come off as a dink above... Just seamed a little fishy.

greenfeind

iTrader: (1)

Where are you in PA? I am in Baltimore right now.

Reddeath210

iTrader: (1)

Bucks, PA zip code 18966. Its about 2hr and 30 minutes from Baltimore.