murphymckenna

iTrader: (1)

Hi guys been a problem with my canaro for the past 12 years I need a used wiring harness for 86 TPI camaro in working condition or if your not sure it works I might ne willing to purchase that too please let me know if you have one for sale and if you have any questions let me know! Thanks hopefully this works!

Tuned Performance

iTrader: (92)

You could adapt this

https://www.ebay.com/itm/25594453359...mis&media=COPY

John in RI

iTrader: (167)

$225 + Shipping,... From an 86 IROC with 700R4. ( Add 4% if sending PayPal Payment; Check or MO accepted )

I replaced the C207 plug, 1 ECM plug & repaired 2 ground terminals on the ECM connector,..... Those 2 just need to be spliced at this point. I didn't find anything else that needed attention.

murphymckenna

iTrader: (1)

That's great I'm in simi valley CA and paypal is probably the easiest way so if you want to total that up I'd be happy to buy it!

John in RI

iTrader: (167)

You're lookin' at $29 Priority Mail / Insured for $225.

I'll send you a PM now,.....................

murphymckenna

iTrader: (1)

Hey John quick question for you i spliced the 2 grounds and that worked out fine i think im just trying to figure out what the name or purpose of this connector is, on the 2nd picture you put in this forum its the big plug one with 2 orange wires coming out of it, when its plugged in its behind and below the distrubutor

Tuned Performance

iTrader: (92)

That’s the oil pressure switch , backup for the relay

murphymckenna

iTrader: (1)

Ok would the car function without this being plugged in ? I attached this plug but maybe I have it in on there the wrong way ? It was the only one I was concerned about

Tuned Performance

iTrader: (92)

The one wire is hot at all times, might as well use. It can plug on either way on the 2 prongs of oil pressure switch.

murphymckenna

iTrader: (1)

Does that mean I could have it on the wrong way? Or are you saying it doesn't matter which way I put it on ?

Tuned Performance

iTrader: (92)

It doesn’t matter

murphymckenna

iTrader: (1)

Ok perfect thanks you guys

John in RI

iTrader: (167)

Thanx for filling in the blanks Brian !