Need Steering colum: Vancouver Area
09-14-2008, 05:47 PM
#1
Member
Thread Starter
Join Date: Jan 2008
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Need Steering colum: Vancouver Area
Hi, I need a Steering column for my 87' GTA...must be a steering column without VATS and can be eithier from a standard or auto tranny Firebird or Camaro.
Thanks!
Thanks!
09-14-2008, 06:50 PM
#2
Member
iTrader: (62)
Join Date: Jun 2005
Location: milwaukee
Posts: 219
Likes: 0
Received 1 Like
on
1 Post
Car: 87gta 88gta 88marovert
Re: Need Steering colum: Vancouver Area
I have a good one form a 86 camaro with an auto trans. The tilt is tight there is no play at all in the column. It does not have a turn signal / wiper stalk I used it on another car. $50 + shipping
09-21-2008, 02:48 AM
#4
Supreme Member
iTrader: (2)
Join Date: Aug 2007
Location: Fairhope, AL
Posts: 2,529
Likes: 0
Received 1 Like
on
1 Post
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Re: Need Steering colum: Vancouver Area
wouldnt be that hard, you should see some of the crazy things that are shipped
just wrap it like crazy in bubble wrap!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
just wrap it like crazy in bubble wrap!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
09-21-2008, 09:09 AM
#5
Senior Member
iTrader: (18)
Join Date: Aug 2005
Location: Brunswick, Ga.
Posts: 847
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Formula
Engine: 350 L98 SD TPI
Transmission: 700R4
Axle/Gears: 10 bolt PBR 3:23 disc posi
Re: Need Steering colum: Vancouver Area
FYI, you can install a VATS and Airbag column into a non-Vats-Airbag car.
I just sold a VATS-Airbag column to a friend who installed it in a 86 Camaro and it works great, you just leave the wires or remove them.
I sold a column to a guy in WA about 2 months ago and it was about $40 to ship. I wrapped it in plenty of bubble wrap and in a box I use to ship T5s.
Make sure the tilt is tight and it has a key.
I just sold a VATS-Airbag column to a friend who installed it in a 86 Camaro and it works great, you just leave the wires or remove them.
I sold a column to a guy in WA about 2 months ago and it was about $40 to ship. I wrapped it in plenty of bubble wrap and in a box I use to ship T5s.
Make sure the tilt is tight and it has a key.
09-21-2008, 09:54 AM
#6
Senior Member
iTrader: (18)
Join Date: Aug 2005
Location: Brunswick, Ga.
Posts: 847
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Formula
Engine: 350 L98 SD TPI
Transmission: 700R4
Axle/Gears: 10 bolt PBR 3:23 disc posi
Re: Need Steering colum: Vancouver Area
A member is parting out a nice 88 TA in WA you might want to get in touch with him.
https://www.thirdgen.org/forums/engi...ng-88-gta.html
https://www.thirdgen.org/forums/engi...ng-88-gta.html
09-21-2008, 10:07 AM
#7
Junior Member
iTrader: (6)
Join Date: Jul 2007
Location: Montreal, Quebec
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 convertible, 89 TTA, 03 GT2
Engine: 5.0 TBI, 3.8 Turbo, 3.6 Twin Turbo
Transmission: 700r4, 2004r, 6 Speed
Axle/Gears: 2.73, 3.27
Re: Need Steering colum: Vancouver Area
Im in montreal Canada, I have one you can have for $40 plus shipping its from an 85 firebird. Comes complete from key switch with keys to indicator stalks ect ect ect.
Trending Topics
09-21-2008, 10:12 PM
#9
Senior Member
iTrader: (24)
Join Date: Dec 2004
Location: washington state
Posts: 712
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 Firebird v6 1992 formula v8
Engine: 3.1, 350 TPI
Transmission: both 700 r4
Re: Need Steering colum: Vancouver Area
I am in Wa I ahve a non tilt nonvats manual column from a 87 camaro. Asking 40.00 plus shipping Complete everything worked when pulled
Thread
Thread Starter
Forum
Replies
Last Post
bubbaz28
Suspension and Chassis
10
09-18-2015 02:09 PM
1Aauto
Sponsored Vendors
0
09-02-2015 01:35 PM