TPI Serpentine bracket needed
#1
TPI Serpentine bracket needed
Need this Bracket: Seems like a stupid thing I could delete,... but I really need to find 1 !!
So far I've only found it on a 91Z28 TPI. I am working on an 88 TPI and I don't seem to have it and can't be sure it was ever installed on the 88 ( MAF, cold start ) set-up. Will not be on TBI cars. It bolts to the right-side AC compressor mounting stud/bolt on the back of the serpentine bracket at one end and to the lower mounting hole on the front of the TPI intake manifold on the other end.
Send me a PM ASAP if you've got one you can spare.
So far I've only found it on a 91Z28 TPI. I am working on an 88 TPI and I don't seem to have it and can't be sure it was ever installed on the 88 ( MAF, cold start ) set-up. Will not be on TBI cars. It bolts to the right-side AC compressor mounting stud/bolt on the back of the serpentine bracket at one end and to the lower mounting hole on the front of the TPI intake manifold on the other end.
Send me a PM ASAP if you've got one you can spare.
#3
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,723
Received 773 Likes
on
520 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: TPI Serpentine bracket needed
Early 1988 used 6 total, 3 on each side. Later years they dropped the lower brackets on each side and kept 4 total. 2 middle and 2 uppers. TPIs of course
#4
TPI Serpentine Rod type bracket needed
OK,..... I need another one of these !! Pretty sure it was mounted to the 90-92 cars. Need the rod/bracket and the 10mm bolt that holds it to the intake. ( I need the rod more than the bolt ! ) Additional pics from another members post for clarity:
Thanx in advance !
Thanx in advance !
Thread
Thread Starter
Forum
Replies
Last Post