V6 to V8 swap?
#1
Junior Member
Thread Starter
Join Date: Aug 2002
Location: M'boro, TN
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
V6 to V8 swap?
does anyone know where i can get a how-to or procedure on a 2.8 to carbed 5.0 swap? i just wanna know what steps i need to take first, what extra parts will and wont work, etc... thanx
peace
john
peace
john
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Do a search on the Motor Swap forum.
You'll find:
Parts - Called a "donor factory V8 car".
Procedure - Take pictures of both, get a shop manual (for each, if different years/models). Then, change everything that is different.
Does this V6 car have any particular sentimental value? If not, the proceedure is: 1) Sell V6 car. 2) Buy a factory V8 car.
This advice is brought to you from someone who didn't know about thirdgen.org before he bought the V6 car (for what he thought was cheap), donor car (which probably could have been cheaper if he had looked around more), and went through the swap.
You'll find:
Parts - Called a "donor factory V8 car".
Procedure - Take pictures of both, get a shop manual (for each, if different years/models). Then, change everything that is different.
Does this V6 car have any particular sentimental value? If not, the proceedure is: 1) Sell V6 car. 2) Buy a factory V8 car.
This advice is brought to you from someone who didn't know about thirdgen.org before he bought the V6 car (for what he thought was cheap), donor car (which probably could have been cheaper if he had looked around more), and went through the swap.
Thread
Thread Starter
Forum
Replies
Last Post