350 TPI to 454 turbo.
#1
Senior Member
Thread Starter
Join Date: Oct 2001
Location: Timrå, Sweden
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Corvette
Engine: Turbo 350
Transmission: 4L80E with TCI T-Com
350 TPI to 454 turbo.
It is a long thread about this project in the Power Adder forum.
https://www.thirdgen.org/techbb2/sho...hreadid=217973
( Click to enlarge )
Before:
After:
It ia a 454 with
* Forged Steel Crankshaft
* Speed-Pro Power Forged Pistons
* Eagle ESP H-Beam Connecting Rods
* Holley EFI single plane intake manifold
* Set of 8 injectors 150 lbs/hr
* 80mm Throttle Body
* Megasquirt
* EDIS-8 ignition
* Holset HX-50
Crank trigger wheel. The sensor is behind the water pump pulley.
Two dual waste spark coils.
A th400 instead of the th700r4 ( R.I.P )
A 4" exhaust.
https://www.thirdgen.org/techbb2/sho...hreadid=217973
( Click to enlarge )
Before:
After:
It ia a 454 with
* Forged Steel Crankshaft
* Speed-Pro Power Forged Pistons
* Eagle ESP H-Beam Connecting Rods
* Holley EFI single plane intake manifold
* Set of 8 injectors 150 lbs/hr
* 80mm Throttle Body
* Megasquirt
* EDIS-8 ignition
* Holset HX-50
Crank trigger wheel. The sensor is behind the water pump pulley.
Two dual waste spark coils.
A th400 instead of the th700r4 ( R.I.P )
A 4" exhaust.
Last edited by JoBy; 09-06-2005 at 06:09 AM.
Thread
Thread Starter
Forum
Replies
Last Post