2.8l v6 to a 305 or 350
04-22-2014, 12:25 AM
#1
Junior Member
Thread Starter
Join Date: Jan 2014
Location: Sherwood, OR
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro
Engine: V6 2.8
Transmission: 700r4
2.8l v6 to a 305 or 350
Engine threw a rod after tranny swap. Need a new setup figured might as well since I need to pull it anyways.
But I have a few questions.
What needs to be modified in order for my 84 to be able to handle it. Anything else besides the mounts and the radiator that I need to worry about?
Will the 700r4 be able to handle the 305/350 swap or do I need to get another?
Any other recommendations? Need to swap it soon! Thanks guys!
But I have a few questions.
What needs to be modified in order for my 84 to be able to handle it. Anything else besides the mounts and the radiator that I need to worry about?
Will the 700r4 be able to handle the 305/350 swap or do I need to get another?
Any other recommendations? Need to swap it soon! Thanks guys!
Last edited by Ce84q8; 04-22-2014 at 12:26 AM. Reason: Unfinished
04-22-2014, 03:07 PM
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Start by reading this:
https://www.thirdgen.org/forums/engi...swap-read.html
https://www.thirdgen.org/forums/engi...swap-read.html
Thread
Thread Starter
Forum
Replies
Last Post
