will aftermarket headers for a 89 lo3 fit an lt1 or a 400 block
#1
Senior Member
Thread Starter
Join Date: Jul 2010
Location: SAN DIEGO, CALIFORNIA
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89RS-5.0/88IROC-Z-5.0/92-5.7 z28/v6
Engine: 5.0/5.7/2.8
Transmission: 5 spd in two stock auto in other tw
Axle/Gears: stock
will aftermarket headers for a 89 lo3 fit an lt1 or a 400 block
just wanting to invest in transferable headers so if i get a lt1 or 400 block if i can reuse them and also does any one know if you can use a 6000 peak roller cam for a 305 on a lt1 or 400
#2
Moderator
iTrader: (1)
Re: will aftermarket headers for a 89 lo3 fit an lt1 or a 400 block
Yes, headers for one small-block chevy will bolt to almost any other small block chevy. However, headers that work with a small 305 TBI will be too restrictive for a larger 350 LT1 or 400 SBC. Unless you get the bigger good headers now, but those wont be optimized for the 305. Personally, I'd just wait and get everything all at once.
#3
Senior Member
Thread Starter
Join Date: Jul 2010
Location: SAN DIEGO, CALIFORNIA
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89RS-5.0/88IROC-Z-5.0/92-5.7 z28/v6
Engine: 5.0/5.7/2.8
Transmission: 5 spd in two stock auto in other tw
Axle/Gears: stock
Re: will aftermarket headers for a 89 lo3 fit an lt1 or a 400 block
so the hooker 2055 headers would not be good flow for a 350 or anything bigger than a lo3
Thread
Thread Starter
Forum
Replies
Last Post