Give me a reality check on price please
#1
Supreme Member
Thread Starter
Give me a reality check on price please
Years ago I bought a set of SLP SS shorties, 50 state legal headers, Y-pipe, and the other pipe, don't recall the name of it, think it went from the Y-pipe to the cat...had them sent to Jet Hot for ceramic coating...
Fast forward 15 years or so, moved, life, more kids, yadda yadda...all still in the box that JH sent me.
I gave my old hood away earlier today to a young man with a Camaro, and he looked up and asked what was in the JH box, told him...he says "man, them things are worth some good money"..we went on talking, seems no one (according to him) makes 50 state smog legal headers in SS anymore...he offered me a pile of money for them, but I declined...
Does anyone here think this set up is worth a grand (his offer)?
Here's the deal, I never want to screw over someone. I thought his offer was kinda high...me being older, him younger...I thought I'd look into it some, figured this board was a good a place to start as any
Fast forward 15 years or so, moved, life, more kids, yadda yadda...all still in the box that JH sent me.
I gave my old hood away earlier today to a young man with a Camaro, and he looked up and asked what was in the JH box, told him...he says "man, them things are worth some good money"..we went on talking, seems no one (according to him) makes 50 state smog legal headers in SS anymore...he offered me a pile of money for them, but I declined...
Does anyone here think this set up is worth a grand (his offer)?
Here's the deal, I never want to screw over someone. I thought his offer was kinda high...me being older, him younger...I thought I'd look into it some, figured this board was a good a place to start as any
#2
Member
Join Date: Jun 2007
Location: Bham AL
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Car: '92 RS
Engine: 357ci
Transmission: G-Force t-5
Axle/Gears: 4.10 10bolt mini spool
Re: Give me a reality check on price please
They are "worth" whatever a person is willing to pay for them..............
That being said, be made the offer, so the only potential screwing is on HIM.............If he thinks its a good price, and you are willing to part with them at that price, I would jump on the offer.
That being said, be made the offer, so the only potential screwing is on HIM.............If he thinks its a good price, and you are willing to part with them at that price, I would jump on the offer.
#3
Member
Join Date: Sep 2007
Location: Dumont NJ
Posts: 109
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Camaro Z28
Engine: 305
Transmission: 5 speed
Axle/Gears: alunimum drum limited slip 3.08
Re: Give me a reality check on price please
I heard the same thing about the SLP headers. I have a set still in the box from SLP. My exhaust guy told me that they are worth some big money.
#4
Supreme Member
iTrader: (10)
Join Date: Sep 2000
Location: Moorpark, CA
Posts: 2,387
Likes: 0
Received 146 Likes
on
105 Posts
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: Give me a reality check on price please
If people want to pay for the name, then yeah I guess its worth it. But for less money we can get custom headers of similar quality from Dyno Don.
#5
Supreme Member
Thread Starter
Re: Give me a reality check on price please
Good point, hven't looked into his for good bit, but know he was using a similar routing o SLP's..
Are his in SS, and include the Y-pipe a provision for the cat as well as ceramic coated?
I did look at his site, but didn't notice what I was asking
Maybe Don will jump in here, are his CARB certified?
Or do smog guys not even care any more if all is hooked up right?
#6
Senior Member
iTrader: (5)
Join Date: Jan 2009
Location: Golden, CO
Posts: 887
Likes: 0
Received 11 Likes
on
9 Posts
Car: 87 IROC
Engine: L31 350
Transmission: T56
Axle/Gears: 4.10 D44
Re: Give me a reality check on price please
Until Don replies, here is what I know:
- No, Don's headers nor Y pipes are not stainless steel.
- a Y pipe for either single or dual cats is available. Some assembly required, so not coated. You can always apply coating once you get headers & Y pipe.
- not CARB certified. That's a LOT of money that needs to be recouped through higher prices. Everything is there so it could be CARB certified. It should pass visual, and you could skate by with the Edelbrock or SLP E.O. if someone asks.
- No other new, quality options for 1 3/4" shorty headers. They will likely fit well (depending on what else you've done), with minimal adjustments or modifications. (Mine needed a little more bolt clearance).
- No, Don's headers nor Y pipes are not stainless steel.
- a Y pipe for either single or dual cats is available. Some assembly required, so not coated. You can always apply coating once you get headers & Y pipe.
- not CARB certified. That's a LOT of money that needs to be recouped through higher prices. Everything is there so it could be CARB certified. It should pass visual, and you could skate by with the Edelbrock or SLP E.O. if someone asks.
- No other new, quality options for 1 3/4" shorty headers. They will likely fit well (depending on what else you've done), with minimal adjustments or modifications. (Mine needed a little more bolt clearance).
#7
Supreme Member
Join Date: Apr 2010
Location: Modesto, California
Posts: 1,015
Likes: 0
Received 5 Likes
on
4 Posts
Car: 88 Firebird Formula
Engine: LO5 5.7 TBI/Ebl Flash
Transmission: 700R4
Axle/Gears: 2.73 stock rear end
Re: Give me a reality check on price please
I'd just like to comment on his headers, they ARE NOT CARB, Cali, legal. He states you can just call slp and get a replacement sticker, well I did before I ordered them from don and they laughed at me and stated they don't give replacement CARB plates or stickers, you have to buy a item from them. I'm sure edelbrock is the same way. Do some research before you take some ones word that they are smog legal. On that note I just passed with flying colors with my hooker 2055's
Thread
Thread Starter
Forum
Replies
Last Post
maroe624
Transmissions and Drivetrain
4
04-16-2017 08:29 AM