82/92 Firebird convertible inner fender liners compatibility.
#1
Member
Thread Starter
82/92 Firebird convertible inner fender liners compatibility.
I used to have a 91 T/A convertible that I sold to a fellow board member.
Apparently, I purchased new fender liners from GM, and while cleaning my garage today I found them, still with GM tags attached.
Does anyone know what's different on these vs 92 Camaro inner fender liners?
The part numbers on specify firebird convertible only. (?)
10179114
Apparently, I purchased new fender liners from GM, and while cleaning my garage today I found them, still with GM tags attached.
Does anyone know what's different on these vs 92 Camaro inner fender liners?
The part numbers on specify firebird convertible only. (?)
10179114
Part Fitment
Year Make Model Engine Important vehicle option details 1982-1992 Pontiac Firebird 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 3.8L, 8 Cyl 5.0L, 8 Cyl 5.7L 2 DOOR, CONVERTIBLE
#2
Member
Re: 82/92 Firebird convertible inner fender liners compatibility.
i don't know, but I may be interested in purchasing them
#3
Member
Thread Starter
Re: 82/92 Firebird convertible inner fender liners compatibility.
#4
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,235
Received 164 Likes
on
119 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: 82/92 Firebird convertible inner fender liners compatibility.
The later Firebird inner fender plastics went inside the fender for tire clearance in the front and rear of the wheel well. The early fender liners were exposed all the way around... Hard to explain, but the 91/92 inner fenders have a little cut at about 45° in the front and rear to go from outside to inside.
The camaro had a larger wheel well opening, about 2" overall IIRC. the panels I believe are completely different as all 82-92 Camaros probably use the same panel.
The camaro had a larger wheel well opening, about 2" overall IIRC. the panels I believe are completely different as all 82-92 Camaros probably use the same panel.
The following users liked this post:
tta1415 (06-08-2022)
Thread
Thread Starter
Forum
Replies
Last Post